User manual

6.6 Fast heat up function
Do not put food in the oven
when the Fast heat up
function operates.
The Fast heat up function is not available
with every oven function. An acoustic
signal sounds if the Fast heat up function
is not available for the set function if
Faulty tone is activated in the settings
menu. Refer to "Using the settings
menu".
The Fast heat up function decreases the
heat up time.
To activate the Fast heat up function
touch and hold for more than three
seconds.
If you activate the Fast heat up function,
the bars on the display
flash one by
one and
comes on to show that
the function operates.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change the
time of day only when the appliance is on.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates.
TIME DELAY To combine DURATION and END function.
SET+GO To start the appliance with necessary settings with only
one touch of the sensor field any time later.
MINUTE MINDER To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE
MINDER at any time and also when the appliance is off.
00:00 COUNT UP TIMER To set the count up, which shows how long the appli-
ance operates. This function has no effect on the opera-
tion of the appliance. It is on immediately when the oven
starts to heat. The COUNT UP TIMER is not activated if
DURATION and END are set.
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows and 12:00.
"12" flashes.
1. Touch or to set the hours.
2. Touch or .
3. Touch or to set the minutes.
4. Touch or .
The display shows the new time.
To change the time of day touch
again and again until starts to flash.
7.3 Setting the DURATION
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION time.
www.aeg.com12