User manual

AUTOMATIC PROGRAMMES
WARNING!
Refer to "Safety information" chapter.
There are 20 automatic programmes and recipes. Use an automatic programme or recipe
when you do not have a knowledge or experience how to prepare a dish. You can find
the recipes for the automatic programmes in the "Recipe book".
There are three types of automatic programmes:
•Automatic recipes;
• Automatic programmes with weight input;
• Automatic programmes with core temperature sensor;
Automatic recipes
Setting an automatic recipe:
1. Touch
two times until the display shows .
The display shows symbol and number of the automatic programme.
2. Touch
or to choose the automatic recipes.
3. Touch
or the automatic recipe activates automatically after five seconds.
4. When set time ends, an acoustic signal operates for two minutes. Symbol
flashes.
The appliance deactivates.
5. Touch any sensor field or open the oven door to stop an acoustic signal.
Automatic programmes with weight input
If you set the weight of the meat, the appliance calculates the roasting time.
1. Touch
again and again until the display shows .
2. Touch
or to set the weight programme (refer to "Recipe book").
The display shows: cooking time, duration symbol
, a default weight, a unit of
measurement (kg, g).
3. Touch
or the settings save automatically after five seconds.
4. The appliance starts. A symbol of the weight unit flashes in the display. During this
time you can change the default weight value with
or . Touch .
5. When set time ends, an acoustic signal operates for two minutes.
flashes.
The appliance deactivates.
6. Touch any sensor field or open the oven door to stop an acoustic signal.
Automatic programmes with core temperature sensor
The core temperature of the food is default and fixed in programmes with core tempera-
ture sensor. The programme ends when the appliance is at the set core temperature.
1. Touch
again and again until the display shows .
2. Install the core temperature sensor (refer to "The core temperature sensor").
3. Touch
or to set the core temperature sensor programme.
16
Automatic programmes