User manual

Warning! A cut-off plug inserted into a 13 amp socket is a serious

safety (shock) hazard. Ensure that the cut-off plug is disposed of

safely.

Plug socket

The plug socket necessary for connection of your appliance to the

electricity supply should be positioned so that it is possible to pull out

the appliance plug.

A concealed spur socket requires 10 A/16 A fusing.

Rehingeing the door

The side at which the door opens can be changed from the right side

(as supplied) to the left side, if the installation site requires.

Warning! When changing the side at which the door opens, the appli-

ance may not be connected to the mains. Remove plug from the

mains beforehand.

Tilt the appliance slightly towards the

rear and prop it securely.

Unscrew the door hinge screws (K)

and take the door bearing (1) down

wards out of its cavity.

Open the door a little way and take it

out downwards.

Unscrew the upper pin (A) and screw

it into place on the opposite side.

Fit the door into the upper pin (A)

and close it.

Insert the pin of the door bearing (1)

into the left hand cavity and

screw the bearing firmly into place

with the screws (K).

☞

AEG97

AEG98