User manual

2.2 Switching on
To switch on the appliance do these
steps:
1.
Connect the mains plug to the pow-
er socket.
2.
Press the ON/OFF button if the dis-
play is off.
3.
The alarm buzzer could operate af-
ter few seconds.
To reset the alarm refer to “High
temperature alarm”.
4.
If "dEMo" appears on the display,
the appliance is in demonstration
mode. Refer to "What to do if..."
paragraph.
5.
The temperature indicators show the
set default temperature.
To select a different set temperature re-
fer to "Temperature regulation".
If the door remains open for
some minutes, the light will turn
off automatically. The light is re-
set by closing and opening the
door itself.
2.3 Switching off
To switch off the appliance do these
steps:
1.
Press the ON/OFF button for few
seconds.
2.
The display switches off.
3.
To disconnect the appliance from
the power disconnect the mains
plug from the power socket.
2.4 Temperature regulation
The set temperature of the freezer may
be adjusted by pressing the temperature
button.
Set default temperature:
• -18°C for the freezer
The temperature indicator shows the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set tem-
perature remains stored.
2.5 Ice maker function
The ice maker is switched on at delivery
and starts up automatically when the ap-
pliance is connected to water and power
supplies.
To switch on and off the function:
1.
Press the Mode button until the cor-
responding icon appears.
The Ice maker indicator flashes for
few seconds.
2.
Press the OK button to confirm.
The OFF icon is shown when the ice
maker is deactivated.
2.6 FROSTMATIC function
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The FROSTMATIC indicator flashes.
2.
Press the OK button to confirm.
The FROSTMATIC indicator is
shown.
This function stops automatically after 52
hours.
To switch off the function before its au-
tomatic end:
1.
Press the Mode button until the
FROSTMATIC indicator flashes.
2.
Press the OK button to confirm.
3.
The FROSTMATIC indicator goes
off.
The function switches off by se-
lecting a different freezer set
temperature.
2.7 Minute Minder function
The Minute Minder function is to be
used to set an acoustic alarm at the pre-
ferred time, useful for example when a
recipe requires to cool down a mixture
for a certain length of time, or when a re-
minder is needed in order not to forget
the bottles placed in the freezer for fast
cooling.
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The Minute Minder indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
6
www.aeg.com