User manual

818 19 26-00/0 19
Initial use
0 1. Insert plug into mains socket.
2. Press ON/OFF button. The green pilot light illuminates. The compressor
starts and then runs automatically.
A warning tone sounds and the red warning light flashes indicating
that the required storage temperature has not yet been reached.
3. Press the WARNING OFF button to switch off the warning tone.
4. Set temperature to -18°C or colder (see section: "Temperature Adjust-
ment").
Important! Wait until the freezer compartment has reached a tempera-
ture of –18 °C, or the red warning light has gone out, before storing
frozen food.
Temperature Adjustment
0 1. Press either the „+“ (WARMER) or „-“ (COLDER) button.
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
2. To adjust to a warmer temperature, press the „+“ button. To adjust to a
colder temperature, press the „-“ button. The changed setting is imme-
diately displayed on the temperature display.
The temperature is adjusted by one display field with each press of a
button.
Note: From a food science point of view, -18 °C for the freezer com-
partment should be considered cold enough as a storage temperature.
3
When the buttons are not further pressed after an adjustment has been
made, after a short period (approx. 5 sec.) the temperature display
switches over and again displays the ACTUAL temperature in the refrig-
erator- or freezer compartment. The display changes from flashing to
continuous illumination.
Important! Please check red warning display and temperature display
regularly to assure maintenance of the storage temperature.