User manual

Appliance Layout 6530 K

Heat setting selection + and -

For setting or changing the heat setting (! to )) for the selected

cooking zone, or when in timer mode, for setting or changing the

required cooking time.

–The heat setting or the cooking time is increased using the + but-

ton and the automatic warm up function activated.

–The heat setting or the cooking time is decreased using the - but-

ton.

"Lock" button and indicator o

For locking the control panel against accidental setting changes, touch

the button for approx. two seconds. The lock is lifted by touching the

button again for two seconds.

The lock can also be used as a child safety measure.

The indicator illuminates when the control panel is locked.

"Double Ring Zone/Casserole Zone" button/

indicators

For switching on and off the outer cooking zone of the double ring

cooking zone, or the casserole zone.

To switch on, the relevant cooking zone must be selected using the

cooking zone buttons.

The indicators illuminate when the outer cooking zone of the double

ring zone or the casserole zone is switched on.

"Timer" button and display field w

For activating the timer function for the selected cooking zone.

The display field shows the cooking time set or remaining for the

selected cooking zone.

The timer can also be used as an "egg timer". Set the required cooking

time. The timer counts the remaining time down back to zero. This

function is not assigned to any cooking zone and programming is not

possible in this condition.

"Timer Active" indicators: the four "Timer Active" indicators show the

cooking zones for which the timer is active. Each of the four cooking

zones has its own indicator.

It is not possible to use the timer functions "Timer" and "Egg Timer"

simultaneously.