User manual

What to do if ...
94
What to do if ...
Rectifying malfunctions
A malfunction may be caused by only a minor fault that you can rectify
yourself using the following instructions. Do not perform any other
work on the appliance if the following information does not provide
assistance in your specific case.
1
Warning! Repairs to the appliance may only be performed by qualified
service engineers. Improper repairs can give rise to significant hazards
for the user. If your appliance needs repairing, please contact your spe-
cialist dealer or Customer Service.
What to do if ...
.... the cooking zones do not work?
0 Check whether
–The mains fuse (fuse box) is intact. If the fuse blows several times,
please call an electrician.
–that the appliance is correctly connected and is switched on,
–indicators on the control panel illuminate,
–the corresponding cooking zone is switched on,
–the cooking zones are set to the desired heat setting for cooking
(see section: "Cooking"),
–the cooking zones have been switched off by the safety switch
(see section: "Safety Functions").
.... the cooking zones cannot be switched on?
0 Check whether
–the control panel is locked (see section: "Locking/Unlocking
the Control Panel").
–more than 10 seconds have elapsed between operating the On/Off
button and switching on the desired cooking zone, (see section:
"Switching on the Appliance").
–the touch switches are partially covered by a damp cloth or liquid.