User manual

Operation of the cooking surface
86
Setting/changing the cooking time
0 1.Select the desired cooking zone using the cooking zone selection but-
tons and set the desired heat setting.
2. Press the "Timer" button to activate the timer function for this cooking
zone.
3. Using the + or - buttons, set or change the amount of time required
until the cooking zone is to switch off automatically (e.g. 20 minutes).
The timer starts after a few seconds and indicates the amount of time
left.
The small "Timer Active" indicator is also illuminated for the respective
cooking zone, e.g. the upper left indicator corresponds to the rear left
cooking zone.
At the end of the cooking time set, the cooking zone switches off auto-
matically and an acoustic signal sounds.
4. Touch the TIMER button to switch off the signal and the indicator.
3
For quicker adjustment, leave your finger on the + or - button until
the desired value is reached.
If the - button is operated first, the time setting starts at 99 minutes.
If the + button is operated, the time setting starts at 1 minute.
Use of the timer as an interval timer (egg timer)
0 1.Press the "Timer" button to activate the timer function.
2. Set desired time using the + or - buttons (e.g. 20 minutes).
The timer starts after a few seconds and indicates the amount of time
left.
When the time set is at an end, an acoustic signal sounds.
3. Touch the TIMER button to switch off the signal.
Displaying the remaining cooking time
0 Select the desired cooking zone using the cooking zone buttons.
If the selected cooking zone is in timer mode, the remaining cooking
time appears in the "Cooking Time" display field.