NOTICE D'UTILISATION 131 FF-m 1 FR-FR FR 949600692
Lors de sa fabrication, cet appareil a été construit selon des normes, directives et/ou décrets pour une utilisation sur le territoire français. Pour la sécurité des biens et des personnes ainsi que pour le respect de l'environnement, vous devez d'abord lire impérativement les préconisations suivantes avant toute utilisation de votre appareil. Pour éviter tout risque de détérioration de l'appareil, transportez-le dans sa position d'utilisation muni de ses cales de transport (selon modèle).
AEG vous félicite. Chère cliente, Cher client, Toutes nos félicitations! Veuillez lire attentivement la notice d'utilisation avant d'installer et d'utiliser l'appareil. Accordez une attention toute particulière aux passages marqués par le symbole . Il s'agit de consignes à respecter pour éviter les accidents. Conservez cette notice d'utilisation avec votre appareil. Si l'appareil devait être vendu ou cédé à une autre personne, assurez-vous que la notice d'utilisation l'accompagne.
Table Des Matieres Titre Page Partie Intéressant L’utilisateur AEG vous félicite. ........................................................................................ 3 Consignes de sécurité ................................................................................ 5 Dessin descriptif .......................................................................................... 7 Friteuse ................................................................................................. 7 Panier .....
Consignes de sécurité friteuse. La friteuse est destinée à un usage strictement domestique. Tout autre emploi risque d’entraîner des accidents. S.A.V. Faites attention aux enfants lorsque la friteuse est en marche. Ne les laissez jamais toucher ou manipuler les boutons de commande de l’appareil. Le S.A.V et les réparations de l’appareil doivent être effectués par l’entreprise AEG ou un organisme agréé par cette entreprise. Ne doivent être employées que les pièces garanties d’origine AEG.
Couvercle métallique Le couvercle fourni doit être utilisé exclusivement avec ce modèle.
Dessin descriptif Couvercle Panier Indicateur de niveau maximum MIN Indicateur de niveau minimum Voyant lumineux Corps chauffant Commandes 7
Panneau de commande 190˚ 170˚ Voyant lumineux Thermostat réglable Robinet de vidange 8
Le robinet de vidange doit être fermé et la bride de sécurité mise en place avant la mise en marche de la friteuse (voir fig. 2). Pour mettre la bride de sécurité, comprimez-la sur les côtés et insérez-la dans l’orifice comme indiqué. Fermé Friteuse Lavez la friteuse à l’eau chaude additionnée de savon de vaisselle ordinaire. 1. Le corps chauffant doit être calé sur le fond de la cuvette et le filtre placé sur l’orifice de vidange avec la face convexe orientée vers le haut. 2.
Mode d’emploi Ne laissez jamais la friture en marche hors de votre surveillance. Evitez de poser du papier, des torchons, des feuilles alu ou tout autre objet combustible à proximité immédiate de la friteuse. L’appareil atteint des températures extrêmement élevées pouvant provoquer l’inflammation du contenu. En cas de feu, remettez tous les boutons de commande sur zéro et fermez la hotte de ventilation, si votre cuisine en est équipée. Etouffez le feu à l’aide d’un couvercle d’ustensile.
Friteuse La cuvette de la friteuse peut contenir de 1,5 l (repère de niveau “minimum”) à 3,5 litres d’huile (bord supérieur de la partie en surépaisseur). Voyant lumineux 190˚ Commande du thermostat. 170˚ Bouton à réglage progressif de 120˚C à 190˚C. La friture se fait en général à 170 180˚C. 1. Fermez le robinet de vidange et mettez en place la bride de sécurité. (Voir fig. ci-contre). 2. Vérifiez que le corps chauffant est correctement calé contre le fond de la cuvette. 3.
Friture Il suffit de mettre l’ingrédient à frire dans la cuvette lorsque le voyant lumineux s’éteint. N’oubliez pas de sécher/faire égoutter d’abord les ingrédients lavés à l’eau. Faites frire votre préparation jusqu’à ce qu’elle soit dorée à votre convenance. Levez le panier dès la fin de l’opération et secouez-le avec précaution pour chasser la matière grasse superflue. Accrochez-le ensuite à ses supports pour le laisser égoutter.
Sécurité de surchauffe L’interrupteur à maximum thermique incorporé déconnecte la friteuse en cas de suréchauffement de la matière grasse. Faire appel au s.a.v. pour réparer l’erreur.
Nettoyage et entretien N'oubliez pas que les corps chauffants et l'huile restent extrêmement brûlants longtemps après l'extinction de la friteuse. Ne mettez jamais d'eau dans l'huile. Avant de procéder au nettoyage, débranchez l'appareil et laissez-le refroidir. Retrait de la protection du bandeau de commande Le retrait de la protection vous permet de procéder plus facilement aux opérations de nettoyage. Comment la retirer 1. Tenez la protection comme indiqué sur la figure. 2. Soulevez-la vers le haut. 3.
Revêtements inox Vidange de la friteuse Pour le nettoyage quotidien des surfaces en inox, utilisez un chiffon fortement essoré. La crasse persistante s’enlève à l’aide d’une crème à récurer liquide. Procédez toujours dans le sens du lissage du métal (de droite à gauche ou de gauche à droite). Pour préserver l’éclat de l’inox, nous vous recommandons d’appliquer régulièrement un produit lustrant spécialement destiné à l’acier inoxydable. Travaillez dans ce cas également dans le sens de lissage du métal.
Cuvette Fermez le robinet d’évacuation avant de procéder au nettoyage de la cuvette. Fermé 1. Sortez le filtre métallique et lavez-le à l’eau et au savon de vaisselle. 2. Versez de l’eau chaude additionnée de savon de vaisselle dans la cuvette (vous pouvez laisser le corps chauffant à sa place). Lavez l’intérieur de la cuvette à l’aide d’une brosse à vaisselle. 3. Placez sous le robinet d’évacuation un bol suffisamment grand pour recevoir l’eau de vaisselle. 4. Ouvrez le robinet pour vider la cuvette. 5.
Réception de la friteuse vous-même doit être signalé au revendeur au plus tard une semaine à compter de la date de livraison. L’écusson placé sur la friteuse indique le n° de série de l’appareil. Inscrivez ce chiffre sur la première page de la présente notice afin de le retrouver rapidement dans le cas où seriez amené(e) à faire appel au S.A.V. Vérifiez à la livraison l’état de votre friteuse. Elle doit être en parfait état et ne comporter aucune marque de détérioration.
Montage de la friteuse La friteuse domestique peut être montée dans la cuisine sur tout plan de travail ayant une épaisseur de 28 à 40 cm. La distance à une éventuelle plaque inférieure de meuble de rangement doit être égale à 235 mm au moins + la hauteur d’un bol de 4 litres au minimum. Fixation Visser les pièces de fixation de façon à pouvoir les fixer sous le plan de travail. Serrer les pièces contre le plan de travail à l’aide d’un tournevis.
Dimensions hors-tout des éléments Longueurs 145 m: Hotte filtrante 290 mm: 2 pl. verre céramique 2 brûleurs à gaz Gril Friteuse Gril combi 580 mm: 4 pl. verre céramique 4 brûleurs à gaz 725 mm: 4 pl. verre céramique Montage de cahque table de cuisson encastrable Au montage de chaque table de cuisson encastrable (2 ou 4 foyers dans un plan de travail dont l’paisseur est au-dessus de 30 mm, il faut une découpe de chaque côte de l’ouverture pour le passage du câble électrique.
Installation Installation électrique L’installation électrique doit être effectuée par un électricien professionnel ou un technicien agréé par le fabricant. Entreprise par une personne n’ayant pas la compétence requise, cette opération risque de provoquer des dommages matériels et des accidents corporels. Elle peut aussi compromettre le fonctionnement de la friteuse. L’installation électrique doit être conforme à la réglementation relative aux installations à courant de haute tension.
Service Avant de faire appel au S.A.V. - Conseil technique Nature du problème Solution La friteuse ne fonctionne pas........... Vérifiez si la friteuse est allumée. Vérifiez le relais HPFI/UFI de votre logement. Le circuit de protection thermique peut avoir coupé l’alimentation électrique par suite d’une surchauffe de l’huile. Poussez le bouton de remise en marche. Si le phénomène se reproduit fréquemment, faire appel au S.A.V. d’AEG.
Service après vente et pièces détachées Toute intervention effectuée par une personne n’ayant pas la compétence professionnelle requise peut entraîner des dommages matériels et/ou des accidents corporels. Elle risque également de compromettre le bon fonctionnement de l’appareil. Pendant la période de garantie, seul le S.A.V. d’AEG ou un technicien agréé par AEG est autorisé à intervenir sur l’appareil. Si des anomalies de fonctionnement se produisent sur l’appareil, reportez-vous en premier lieu au chap.
Electrolux Home Products France S.A.S. au capital de 67 500 000 - 552 042 285 RCS SENLIS AEG Pour tenir nos engagements, nous écoutons les Consommateurs Le SERVICE CONSEIL CONSOMMATEURS AEG est le lien privilégié entre la marque et ses Consommateurs. Il assure en permanence une double mission : satisfaire au mieux vos exigences et tirer parti de cette proximité pour améliorer sans cesse les produits que nous vous proposons.
325 88-9090 Rev.