User manual

Setting Implementation

Emptying

water reser-

voir - warn-

ing LED off

1. Turn the programme selector to any programme.

2. Press simultaneously the LONG ANTI-CREASE (KNITTERSCHUTZ PLUS) and

TIME (ZEITWAHL) buttons and hold down for approx. 5 seconds.

The current setting is on the display:

–

WATER RESERVOIR (BEHÄLTER) diode flashes and display shows

- warning message is off

–

WATER RESERVOIR (BEHÄLTER) diode steady and display shows

- warning message is switched on

1) Water contains, a variable quantity of limestone and mineral salts of which quantities vary according to

geographical locations thus varying its conductivity values. Relevant variations of the conductivity of the

water compared to those prefixed by the factory could slightly influence the residual humidity of the

laundry at the end of the cycle. Your dryer allows you to regulate the sensitivity of the drying sensor based

on conductivity values of the water.

2) By default the warning LED is always on at the end of the drying cycle or during the cycle if the water

reservoir is full. When using an external drain for the condensed water warning can be offi

TECHNICAL DATA

Parameter Value

Height x width x depth 85 x 60 x 58 cm

Drum volume 108 l

Depth with loading door open 109 cm

Height can be adjusted by 1.5 cm

Weight when empty approx. 40 kg

Loading volume (depends on programme)

max. 7 kg

Voltage 220-230 V

Required fuse 10 A

Total power 2350 W

Energy efficiency class

Energy consumption (7 kg of cotton, pre-

drained at 1000 rpm)

3.92 kWh

Average annual energy consumption 284.1 kWh

Use Domestic

Permissible ambient temperature + 5°C to + 35°C

Consumption values

The consumption values have been established under standard conditions. They may deviate

when the machine is operated in domestic circumstances.

Technical data