User manual

818 35 64-02/3 25
What to do if ...
Correcting Malfunctions
A malfunction may be caused by only a minor fault that you can rectify
yourself using the following instructions. Do not perform any other
work on the appliance if the following information does not provide
assistance in your specific case.
1
Warning! Repairs to refrigerators may only be performed by qualified
service engineers. Improper repairs can give rise to significant hazards
for the user. If your appliance needs repairing, please contact your spe-
cialist dealer or our Customer Service.
Malfunction Possible Cause Remedy
Appliance does not work,
temperature display is not
lit.
Appliance is not switched
on.
Switch on the appliance.
Mains plug is not plugged
in or is loose.
Insert mains plug.
Fuse has blown or is defec-
tive.
Check fuse, replace if nec-
essary.
Socket is defective.
Mains malfunctions are to
be corrected by an electri-
cian.
Appliance cools too much. Temperature is set too cold.
Set the temperature to a
warmer setting temporar-
ily.
The food is too warm.
Temperature is not properly
adjusted.
Please look in the
"Temperature Adjustment"
section.
Door was open for an
extended period.
Open the door only as long
as necessary.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
Press the COOLMATIC but-
ton or set the temperature
to a colder setting tempo-
rarily.
The appliance is near a
heat source.
Please look in the "Installa-
tion Location" section.