User manual

22
Contrast and Brightness
1. Turn the programme knob to any programme and press the OPTION
button repeatedly, until the
ú SETUP symbol flashes.
2. Press the OK button.
3. Press the OPTION button repeatedly until the display shows CONTRAST
or BRIGHTNESS.
4. Press the OK button.
5. Using the OPTION button,
set the desired setting. With
each press of the button or if
the button is kept pressed
down, the black triangle in
the diagram moves further
to the right for more con-
trast or more brightness. If the triangle reaches the right hand edge, it
starts again from the left.
6. Press the OK button. The icon changes to the next special function.
7. Press the OPTION button repeatedly, until the initial display appears.
Condensate tank indicator
The tank indicator at the end of the programme can be deactivated, for
example, if an external condensed water drain is installed.
1. Turn the programme knob to any programme and press the OPTION
button repeatedly, until the
ú SETUP symbol flashes.
2. Press the OK button.
3. Press the OPTION button repeatedly, until TANK WARNING is shown in
the display.
4. Press the OK button.
5. Press the OPTION button to
set to the desired setting
(ENABLED, DISABLED).
6. Press the OK button to con-
firm the setting. The display
changes to the initial display.
Contrast
12.45
ƒ………………™………………‡
aýaýa aýaýaýaýBýaýaýaýa
TÜR
PORTE
U/MIN
T/MIN.
OPTION
OPTIONS
OK
OK
ZEIT
TEMPS
Tank Warning
12.45
ENABLED
aýaýa aýaýaýaýBýaýaýaýa
TÜR
PORTE
U/MIN
T/MIN.
OPTION
OPTIONS
OK
OK
ZEIT
TEMPS