User manual

1. Unplug the appliance.
2. If necessary wait until the water has
cooled down.
3. Open the pump door and pull flap
forward to remove.
4. Place a container close to the pump to
collect any spillage.
5. Pull out the emergency emptying hose,
place it in the container and remove its
cap.
6. When no more water comes out,
unscrew the pump cover by turning it
anti-clockwise and remove the filter. Use
pliers, if necessary. Always keep a rag
nearby to dry up any water spillages
when removing the cover. Clean the
filter under a tap, to remove any traces
of fluff.
7. Remove foreign bodies and fluff from the
filter seat and from the pump impeller.
8. Check carefully whether the pump
impeller rotates (it rotates jerkily). If it
doesn’t rotate, please contact your
Service Centre.
9. Put the cap back on the emergency
emptying hose and place the latter back
in its seat.
10. Replace the filter into the pump by
inserting it correctly into the special
guides. Screw the pump cover firmly by
turning it clockwise.
11. Refit and close the pump door.
Warning!
When the appliance is in use and depending
on the programme selected there can be hot
water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When refitting the
pump cover, ensure it is securely re-tightened so as to stop leaks and young
children being able to remove it.
26
Care and cleaning
132947740.qxd 20/11/2009 9.56 Pagina 26