LAVAMAT REGINA 2552F Waschautomat Benutzerinformation
Sehr geehrte Kundin, sehr geehrter Kunde, lesen Sie bitte diese Benutzerinformation sorgfältig durch und bewahren Sie sie zum späteren Nachschlagen auf. Geben Sie diese Benutzerinformation an eventuelle Nachbesitzer des Gerätes weiter. 1 3 2 2 Folgende Symbole werden im Text verwendet: Sicherheitshinweise Warnung! Hinweise, die Ihrer persönlichen Sicherheit dienen. Achtung! Hinweise, die zur Vermeidung von Schäden am Gerät dienen.
Inhalt Gebrauchsanweisung. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Sicherheit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Gerätebeschreibung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bedienblende . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Anzeigen im Display . . . . . . . . . . . . . . . . . . . . . . .
Was tun, wenn.... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kleine Störungen selbst beheben. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wenn das Waschergebnis nicht befriedigend ist . . . . . . . . . . . . . . . . . . . . . . Notentleerung durchführen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Laugenpumpe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gebrauchsanweisung 1 Sicherheit Vor der ersten Inbetriebnahme • Beachten Sie die „Aufstell- und Anschlussanweisung“. • Bei Geräteanlieferung in Wintermonaten mit Minustemperaturen: Waschautomat vor Inbetriebnahme für 24 Stunden bei Raumtemperatur lagern. Bestimmungsgemäße Verwendung • Der Waschautomat ist nur zum Waschen haushaltsüblicher Wäsche im Haushalt bestimmt. • Umbauten oder Veränderungen am Waschautomaten sind nicht zulässig.
• Vor Reinigung, Pflege und Wartungsarbeiten den Waschautomaten ausschalten. Zusätzlich Netzstecker aus der Steckdose ziehen oder – bei Festanschluss – LS-Schalter im Sicherungskasten ausschalten bzw. Schraubsicherung ganz herausdrehen. • Bei Betriebspausen das Gerät vom Stromnetz trennen und Wasserhahn schließen. • Netzstecker nie am Kabel aus der Steckdose ziehen, sondern am Stecker. • Vielfachstecker, Kupplungen und Verlängerungskabel dürfen nicht verwendet werden.
Gerätebeschreibung Bedienblende Waschmittelschublade Typschild (hinter Einfülltür) Drei Schraubfüße (höhenverstellbar); hinten links: Automatikfuß Sockelklappe/ Laugenpumpe Bedienblende Programmwähler und Ein-/Aus-Schalter Display Funktions-Tasten Taste START/PAUSE Anzeigen im Display Informationsfeld, zeigt aktuelle Einstellungen an KOCHWÄSCHE Programmende um Temperatur 12.45 Aktuelle Uhrzeit 15.
Programmübersicht • KOCHWÄSCHE 6kg • • • • BUNTWÄSCHE/ PFLEGELEICHT 60°, 50°, 40°, 30°, Kalt 6kg bzw.
Anwendung/Eigenschaften Pflegesymbole1) Energiesparprogramm bei 60 °C für leicht bis normal verschmutzte Koch-/Buntwäsche aus Baumwolle/Leinen. MO Programm bei 95 °C für normal bis stark verschmutzte Kochwäsche aus Baumwolle/ Leinen. O Universalprogramm für Koch-/Buntwäsche aus Baumwolle/Leinen sowie für pflegeleichte Mischgewebe und Synthetics. Das Programm passt sich automatisch an die unterschiedlichen Gewebearten und Füllmengen an. Bei reiner Beladung mit pflegeleichter Wäsche nur 3kg einfüllen.
Vor der ersten Inbetriebnahme Das erste Einschalten - Sprache einstellen 3 Ab Werk ist die Displayanzeige standardmäßig deutsch eingestellt. Wichtig! Falls das Display nach dem Einschalten des Gerätes nicht das Menü für die Spracheinstellung anzeigt, wurde das Gerät vorher schon einmal eingeschaltet. Sehen Sie in diesem Fall bitte im Kapitel „Extras/ Sprache“ nach. Zum Einschalten des Gerätes Programmwähler auf ein beliebiges Programm drehen, z. B. KOCHWÄSCHE.
Uhrzeit einstellen Damit Uhrzeit und Programmende korrekt angezeigt werden, bitte die Anzeige im Display überprüfen und gegebenenfalls die aktuelle Uhrzeit einstellen. Sehen Sie dazu bitte im Kapitel „Extras/Uhr“ nach. Vorreinigung durchführen Um eventuelle fertigungsbedingte Rückstände aus Trommel und Laugenbehälter zu entfernen, den ersten Waschgang ohne Wäsche durchführen. Programm: BUNTWÄSCHE/PFLEGELEICHT 60 °C, Option ZEIT SPAREN: EXTRA KURZ, ca. 1/4 Messbecher Waschpulver dosieren.
Waschgang durchführen Einfülltür öffnen/Wäsche einfüllen 1. Einfülltür öffnen: am Griff der Einfülltür ziehen. 2. Wäsche auseinanderfalten und locker einfüllen. Große und kleine Teile mischen. Achtung! Keine Wäsche zwischen Einfülltür und Gummidichtung einklemmen. 3. Einfülltür fest zudrücken. Schloss muss hörbar einrasten. Wasch-/Pflegemittel einfüllen Achtung! Nur Wasch-/Pflegemittel verwenden, die für HaushaltsWaschautomaten geeignet sind.
Waschpulver/Tabs für die Hauptwäsche Weichspüler/ Formspüler/ Stärke Fleckensalz/-tabs Waschpulver/Tabs für die Vorwäsche oder Wasserenthärter Waschpulver/Tabs für die Hauptwäsche Wenn Sie Wasserenthärter benutzen und das rechte Fach für Vorwaschmittel benötigen, den Wasserenthärter auf das Hauptwaschmittel in das linke Fach geben. Weichspüler, Formspüler, Stärke Fach höchstens bis zur Marke MAX füllen. Dickflüssige Konzentrate vor dem Einfüllen nach Anleitung des Herstellers verdünnen.
Temperatur ändern Taste TEMP. C° so oft drücken, bis die gewünschte Temperatur angezeigt wird. BUNT/PFLEGELEICHT Programmende um 12.45 14.37 50C1500 aýýýýýaýaýaýaýaýaýaýaýa TEMP. C° TEMP. C° U/MIN. T/MIN. OPTION OPTIONS OK OK ZEIT TEMPS Schleuderdrehzahl ändern/Spülstopp wählen 3 14 Taste U/MIN. so oft drücken, bis die gewünschte Schleuderdrehzahl bzw. SPÜLSTOPP angezeigt wird. BUNT/PFLEGELEICHT Programmende um 12.45 14.37 50C 800 aýýýýýaýaýaýaýaýaýaýaýa TEMP. C° TEMP. C° U/MIN. T/MIN.
Optionen einstellen Optionen können zu einem vorher gewählten Waschprogramm hinzugewählt werden. Taste OPTION drücken. Das Display zeigt die Symbole für die Optionen an. VORWÄSCHE Vorwaschen bei ca. 30 °C vor dem automatisch folgenden Hauptwaschgang. SENSITIV Erhöhte Spülwirkung durch zusätzlichen Spülgang bei gleichzeitig verringerter Trommelbewegung (Gewebeschonung). Ideal, wenn häufig gewaschen werden muss, z. B. bei Übersensibilität der Haut.
Vorwäsche, Sensitiv, Flecken, Nachtprogramm 1. Taste OPTION so oft drücken, bis das gewünschte Symbol blinkt, z. B. VORWÄSCHE. (Mit jedem Tastendruck blinkt das nächste Symbol – von links nach rechts gesehen.) 3 BUNT/PFLEGELEICHT Vorwäsche 12.45 14.37 aýýýýýVýSýFýLýBýaýaýaýa TEMP. C° TEMP. C° U/MIN. T/MIN. OPTION OPTIONS OK OK ZEIT TEMPS 2. Taste OK drücken. Das SymBUNT/PFLEGELEICHT 12.45 bol hört auf zu blinken. Ein 14.
ZEIT SPAREN: KURZ oder EXTRA KURZ Verkürztes Programm für leichter verschmutzte Wäsche. – KURZ: nur möglich bei den Programmen KOCHWÄSCHE, BUNTWÄSCHE/PFLEGELEICHT und LEICHTBÜGELN 40. – EXTRA KURZ: nur möglich bei den Programmen KOCHWÄSCHE, BUNTWÄSCHE/PFLEGELEICHT, LEICHTBÜGELN 40 und FEINWÄSCHE. STARTZEIT-VORWAHL Um den Start eines Programms um 30 Minuten bis max. 20 Stunden aufzuschieben. Zeit sparen: Kurz oder Extra Kurz 3 1. Taste ZEIT so oft drücken, bis Symbol ZEIT SPAREN blinkt. 2.
Startzeit-Vorwahl 1. Taste ZEIT so oft drücken, bis Symbol STARTZEIT-VORWAHL blinkt. 2. Taste OK drücken. Im Display wird „Start in 0 min“ angezeigt. 3 3. Taste ZEIT so oft drücken, bis das Display den gewünschten Startaufschub anzeigt, z. B. „Start in 4h“ (=4 Stunden). Unter dem Symbol STARTZEIT-VORWAHL erscheint ein schwarzer Balken. Startzeit-Vorwahl Start in 4h 12.45 18.37 aýýýýýaýaýaýaýaýaýaýKýT_ TEMP. C° TEMP. C° U/MIN. T/MIN.
Ablauf des Programms 3 Das Display zeigt den Programmschritt an, der gerade ausgeführt wird, sowie den Zeitpunkt des Programmendes. BUNT/PFLEGELEICHT Waschen 12.45 14.37 50C 800 aýýýýýaýaýaýaýaýaýaýaýa TEMP. C° TEMP. C° U/MIN. T/MIN. OPTION OPTIONS OK OK ZEIT TEMPS Der Zeitpunkt des Programmendes kann sich während des Waschvorgangs verändern, da sich das Programm an unterschiedliche Bedingungen beim Waschen anpasst (z. B. Wäscheart und -menge, Unwuchterkennung beim Schleudern, Sonderspülgang etc.
3. Nach dem Waschen die Waschmittelschublade etwas herausziehen, damit sie austrocknen kann. Einfülltür nur anlehnen, damit der Waschautomat auslüften kann. Wenn SPÜLSTOPP oder NACHTPROGRAMM gewählt war: Nach einem SPÜLSTOPP bzw. nach Ablauf eines Programms mit NACHTPROGRAMM blinkt die Anzeige START/PAUSE.
4. Mit Taste OPTION VORWÄSCHE einstellen und Taste OK drücken. Unter dem Symbol VORWÄSCHE erscheint ein schwarzer Balken. 5. Taste OPTION so oft drücken, bis Symbol EXTRAS blinkt. 3 3 6. Taste OK drücken. Das Display wechselt in die Ebene der Sonderfunktionen. Als erstes wird der Programmspeicherplatz MEMORY 1 angeboten. Memory 1 Progr. speichern? aýýýýýaýaýaýaýBýaýaýaýa TEMP. C° TEMP. C° U/MIN. T/MIN.
5. Taste OPTION so oft drüLautstärke cken, bis die gewünschte NORMAL Lautstärke (NORMAL, LEISE, aýýýýýaýaýaýaýBýaýaýaýa AUS) im Display angezeigt TEMP. C° U/MIN. OPTION OK ZEIT wird. TEMP. C° T/MIN. OPTIONS OK TEMPS 6. Taste OK drücken, um die Einstellung zu bestätigen. Die Anzeige wechselt zur nächsten Sonderfunktion. 7. Taste OPTION so oft drücken, bis die Ausgangsanzeige angezeigt wird. Extra Spülen 1.
6. Taste OK drücken. Die Anzeige wechselt zur nächsten Sonderfunktion. 7. Taste OPTION so oft drücken, bis die Ausgangsanzeige erscheint. Uhr 1. Programmwähler auf beliebiges Programm drehen und Taste OPTION so oft drücken, bis Symbol EXTRAS blinkt. 2. Taste OK drücken. 3. Taste OPTION so oft drücken, bis im Display UHR angezeigt wird. 4. Taste OK drücken. 5. Mit der Taste OPTION die ge11.17 Uhr wünschte Uhrzeit einstellen.
Kindersicherung Bei eingestellter Kindersicherung kann die Einfülltür nicht mehr geschlossen werden. Kindersicherung einstellen: Drehknopf (an der Innenseite der Einfülltür) mit einer Münze im Uhrzeigersinn bis zum Anschlag drehen. 1 Warnung! Der Drehknopf darf sich nach dem Einstellen nicht in versenkter Position befinden, sonst ist die Kindersicherung nicht aktiv! Der Drehknopf muss gemäß Abbildung herausstehen. Kindersicherung aufheben: Drehknopf entgegen dem Uhrzeigersinn bis zum Anschlag drehen.
2. Weichspülereinsatz aus dem mittleren Fach herausnehmen. 3. Alle Teile mit Wasser reinigen. 4. Weichspülereinsatz bis zum Anschlag aufstecken, so dass er fest sitzt. 5. Gesamten Einspülbereich des Waschautomaten, besonders auch die Düsen an der Oberseite der Einspülkammer, mit einer Bürste reinigen. 6. Waschmittelschublade in Führungsschienen einsetzen und einschieben.
Was tun, wenn... Kleine Störungen selbst beheben Falls während des Betriebs 3x ein kurzer Signalton ertönt und eine der folgenden Anzeigen im Display erscheint: – „Kein Wasserzulauf/Zulauf prüfen“, – „Kein Wasserablauf/Ablauf prüfen“ oder „Pumpe blockiert“, – „Tür offen“, sehen Sie bitte in nachfolgender Tabelle nach. Nachdem der Fehler behoben ist, Taste START/PAUSE drücken. Bei Anzeige von „Fehlercode : E und Zahl oder Buchstabe“: Gerät ausund wieder einschalten. Programm neu einstellen.
Problem Waschautomat vibriert während des Betriebs oder steht unruhig. Mögliche Ursache Abhilfe Transportsicherung nicht Transportsicherung entferentfernt. nen. Schraubfüße nicht korrekt eingestellt. Nur wenige, große WäWäsche ist nicht geschleuschestücke in der Tromdert. mel. Verschraubung am Zulaufschlauch undicht. Füße laut Aufstell- und Anschlussanweisung justieren. Trommel immer möglichst voll beladen. Große und kleine Teile mischen. Zulaufschlauch festschrauben. Ablaufschlauch undicht.
Problem Mögliche Ursache Einfülltür verriegelt. Einfülltür lässt sich bei ein- Stromausfall! (Alle Angeschaltetem Gerät nicht zeigen sind aus). öffnen. Einfülltür bleibt aus Sicherheitsgründen ca. 4 bis 10 Minuten verriegelt. Wäsche stark verknittert. Eventuell zuviel Wäsche eingefüllt. Abhilfe Warten bis das Display abwechselnd „Tür entriegelt“ und „Ende“ anzeigt. Programm läuft weiter, wenn Stromausfall vorüber ist.
Notentleerung durchführen 1 Warnung! Waschautomat vor Notentleerung ausschalten und den Netzstecker aus der Steckdose ziehen! Warnung! Die Waschlauge, die aus dem Notentleerungsschlauch ausläuft, kann heiß sein. Verbrühungsgefahr! Vor einer Notentleerung Waschlauge abkühlen lassen! 1. Sockelklappe aufklappen und abziehen. 2. Notentleerungsschlauch herausnehmen. 3. Flaches Auffanggefäß unterstellen. Anschließend Verschlussstopfen durch Drehen gegen den Uhrzeigersinn lösen und herausziehen. 4.
Laugenpumpe 1 Die Laugenpumpe ist wartungsfrei. Das Öffnen des Pumpendeckels ist nur im Störungsfall erforderlich, wenn kein Wasser mehr abgepumpt wird, z. B. bei blockiertem Pumpenrad. Bitte vor dem Einfüllen der Wäsche immer sicherstellen, dass sich keine Fremdkörper in den Taschen oder zwischen der Wäsche befinden. Büroklammern, Nägel etc., die eventuell mit der Wäsche in den Waschautomaten gelangt sind, bleiben im Pumpengehäuse (Fremdkörperfalle, die das Pumpenrad schützt) liegen.
Entsorgung 2 2 3 1 Verpackungsmaterial Die Verpackungsmaterialien sind umweltverträglich und wiederverwertbar. Die Kunststoffteile sind gekennzeichnet, z. B. >PE<, >PS< etc. Entsorgen Sie die Verpackungsmaterialien entsprechend ihrer Kennzeichnung bei den kommunalen Entsorgungsstellen in den dafür vorgesehenen Sammelbehältern.
Technische Daten 5 Dieses Gerät entspricht den folgenden EG-Richtlinien: – 73/23/EWG vom 19.02.1973 Niederspannungs-Richtlinie – 89/336/EWG vom 03.05.1989 EMV-Richtlinie einschließlich Änderungs-Richtlinie 92/31/EWG – 93/68/EWG vom 22.07.1993 CE-Kennzeichnungs-Richtlinie Höhe x Breite x Tiefe 850 x 598 x 640mm Tiefe bei geöffneter Einfülltür 1017 mm Höhenverstellbarkeit ca. +10/-5mm Füllmenge (programmabhängig) max.
Aufstell- und Anschlussanweisung 1 Sicherheitshinweise für die Installation • Dieser Waschautomat ist nicht unterbaufähig. • Vor Inbetriebnahme das Gerät auf Transportschäden überprüfen. Ein beschädigtes Gerät auf keinen Fall anschließen. Wenden Sie sich im Schadensfall an Ihren Lieferanten. • Vor Inbetriebnahme müssen alle Teile der Transportsicherung entfernt sein. Andernfalls kann es beim Schleudern zu Schäden am Gerät oder an benachbarten Möbeln kommen.
Aufstellung des Gerätes Gerät transportieren 1 Warnung! Der Waschautomat hat ein hohes Gewicht. Verletzungsgefahr! Vorsicht beim Anheben. • Das Gerät nicht auf die Vorderfront und nicht auf die rechte Seite (von vorne gesehen) legen. Elektrische Bauteile können nass werden. • Gerät niemals ohne Transportsicherung transportieren. Transportsicherung erst am Aufstellort entfernen! Transport ohne Transportsicherung kann zu Schäden am Gerät führen.
3. Beide Kunststoffkappen seitlich abziehen. 3 Spezialschlüssel A und Verschlusskappen B (2 Stück) und C (1 Stück) liegen dem Gerät bei. 4. Schraube D inkl. Druckfeder mit Spezialschlüssel A entfernen. 5. Verschlusskappe C gemäß Abbildung umstülpen. 6. Loch mit Verschlusskappe C verschließen. 7. Zwei Schrauben E mit Spezialschlüssel A herausschrauben. 8. Vier Schrauben F mit Spezialschlüssel A herausschrauben. 9. Transportschiene G abnehmen. 10. Die vier Schrauben F wieder einschrauben. 11.
• Bei Standplätzen mit kleinformatigen Fliesen handelsübliche Gummimatte unterlegen. Wenn das Gerät auf einem Sockel stehen soll: Damit das Gerät sicher auf dem Sockel steht, müssen Standbleche*) montiert werden, in die das Gerät eingestellt wird. Wenn das Gerät auf schwingenden Böden stehen soll, z. B. Holzbalkenböden mit Dielenbrettern: Gerät möglichst in einer Ecke des Raumes aufstellen. 1. Eine wasserbeständige Holzplatte (mindestens 15 mm dick) auf mindestens 2 Fußbodenbalken festschrauben. 2.
Elektrischer Anschluss Angaben über Netzspannung, Stromart und die erforderliche Absicherung sind dem Typschild zu entnehmen. Das Typschild ist im Bereich der Einfüllöffnung angebracht. Wasseranschluss Achtung! • Dieses Gerät darf nicht an Warmwasser angeschlossen werden! • Beim Anschluss nur neue Schlauchsätze verwenden! • Gerät nur an die Trinkwasserleitung anschließen. Regen- oder Brauchwasser nur dann verwenden, wenn es die Anforderungen nach DIN1986 und DIN1988 erfüllt.
Wasserzulauf 3 Mitgeliefert wird ein Druckschlauch von 1,5m Länge. Wird ein längerer Zulaufschlauch benötigt, sind ausschließlich Originalschläuche zu verwenden. Der Kundendienst hält Schlauchsätze in verschiedenen Längen bereit. Dichtringe sind entweder in den Muttern der Schlauchverschraubung eingelegt oder im Beipack enthalten. Keine anderen Dichtungen verwenden! Achtung! Alle Schlauchverschraubungen nur von Hand anziehen. 1. Schlauch mit dem abgewinkelten Anschluss an der Maschine anschließen.
Wasserablauf Der Höhenunterschied zwischen Standfläche und Wasserabfluss darf höchstens 1 Meter betragen. Zur Verlängerung dürfen nur Originalschläuche verwendet werden. (Max. 3 m auf dem Fußboden verlegt und dann bis 80 cm hoch). Der Kundendienst führt Ablaufschläuche in verschiedenen Längen. Wasserablauf in einen Siphon Die Verbindungsstelle Tülle/Siphon mit einer Schlauchschelle (im Fachhandel erhältlich) sichern. 1 Wasserablauf in ein Waschbecken/Badewanne Achtung! – Kleine Becken sind nicht geeignet.
Garantie/Kundendienst Servicestellen 5506 Mägenwil/Zürich Industriestrasse 10 9000 St.
www.electrolux.com p t b Albania +35 5 4 261 450 Rr. Pjeter Bogdani Nr. 7 Tirane Belgique/België/ Belgien +32 2 363 04 44 Bergensesteenweg 719, 1502 Lembeek Èeská republika +420 2 61 12 61 12 Budìjovická 3, Praha 4, 140 21 Danmark +45 70 11 74 00 Sjællandsgade 2, 7000 Fredericia Deutschland +49 180 32 26 622 Muggenhofer Str. 135, 90429 Nürnberg Eesti +37 2 66 50 030 Mustamäe tee 24, 10621 Tallinn España +34 902 11 63 88 Carretera M-300, Km.
p t b Slovenija +38 61 24 25 731 Electrolux Ljubljana, d.o.o. Tržaška 132, 1000 Ljubljana Slovensko +421 2 43 33 43 22 Electrolux Slovakia s.r.o.
Service Bei technischen Störungen prüfen Sie bitte zunächst, ob Sie mit Hilfe der Gebrauchsanweisung (Kapitel „Was tun, wenn...“) das Problem selbst beheben können. Wenn Sie das Problem nicht beheben konnten, wenden Sie sich bitte an den Kundendienst oder einen unserer Service-Partner. Um Ihnen schnell helfen zu können, benötigen wir folgende Angaben: – Modellbezeichnung – Produkt-Nummer (PNC) – Serien-Nummer (S-No.
www.electrolux.com www.aeg-electrolux.de www.aeg-electrolux.at www.aeg-electrolux.be www.aeg-electrolux.lu www.aeg.