LAVATHERM 57700 Kondensationstrockner Gebrauchsanweisung
Sehr geehrte Kundin, sehr geehrter Kunde, lesen Sie bitte diese Gebrauchsanweisung sorgfältig durch. Beachten Sie vor allem die Sicherheitshinweise auf den ersten Seiten dieser Gebrauchsanweisung! Bewahren Sie bitte die Gebrauchsanweisung zum späteren Nachschlagen auf. Geben Sie sie an eventuelle Nachbesitzer des Gerätes weiter.
Inhalt Sicherheitshinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Allgemeine Hinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Entsorgung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Umwelttips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Die wichtigsten Merkmale Ihres Gerätes . . . . .
Inhalt Blenden und Bedienteile reinigen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Was tun, wenn ...? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Glühlampe auswechseln . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Türanschlag wechseln . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Programmiermöglichkeiten . . . . . . . . . . . . . . . . . . . . .
Sicherheitshinweise Sicherheitshinweise Die Sicherheit von AEG-Elektrogeräten entspricht den anerkannten Regeln der Technik und dem Gerätesicherheitsgesetz. Dennoch sehen wir uns als Hersteller veranlaßt, Sie mit folgenden Sicherheitshinweisen vertraut zu machen: Allgemeine Sicherheit • Reparaturen am Trockner dürfen nur von Fachkräften durchgeführt werden. Durch unsachgemäße Reparaturen können erhebliche Gefahren für den Benutzer entstehen.
Sicherheitshinweise Sicherheit von Kindern • Kinder können Gefahren, die im Umgang mit Elektrogeräten liegen, oft nicht erkennen. Sorgen Sie deshalb für die notwendige Aufsicht während des Betriebs und lassen Sie Kinder nicht mit dem Trockner spielen – es besteht die Gefahr, daß Kinder sich einschließen. • Verpackungsteile (z.B. Folien, Styropor) können für Kinder gefährlich sein. Erstickungsgefahr! Verpackungsteile von Kindern fernhalten.
Sicherheitshinweise Aufstellung und Anschluß • Wenn der Trockner getragen werden soll, vorher Sockelblende entfernen! • Trockner auf Transportschäden überprüfen. Ein beschädigtes Gerät auf keinen Fall anschließen! Wenden Sie sich im Schadensfall an Ihren Lieferanten.
Allgemeine Hinweise Allgemeine Hinweise • Gestärkte Wäsche hinterläßt einen Stärkebelag in der Trommel und gehört deshalb nicht in den Trockner. • Wenn Sie die in der Programmtabelle angegebenen Füllmengen überschreiten, müssen Sie mit Knitterbildung rechnen! Bei sehr empfindlichen Geweben sollten Sie höchstens 1,5kg Wäsche einfüllen. • Bei Verwendung von sogenannten ‘Weichpflegetüchern’ kann es zu einer Belagbildung am Flusensieb kommen, die bis zu einer Verstopfung des Flusensiebs führen kann.
Entsorgung Entsorgung Verpackungsmaterial entsorgen! Entsorgen Sie das Verpackungsmaterial Ihres Wäschetrockners sachgerecht. Alle Verpackungsmaterialien sind umweltverträglich und können gefahrlos deponiert oder in der Müllverbrennungsanlage verbrannt werden. Die Kunststoffe können auch wiederverwendet werden: • Die äußere Hülle und die Beutel im Innern bestehen aus Polyethylen (Kennzeichnung >PE<). • Die Polsterteile bestehen aus geschäumtem, FCKW-freiem Polystyrol (Kennzeichnung >PS<).
Umwelttips Umwelttips • Beim Waschen auf Weichspüler verzichten! Im Wäschetrockner wird Ihre Wäsche auch ohne Weichspüler flauschig und weich. Versuchen Sie es einmal! • Wäsche auflockern! Lockern Sie die Wäsche auf, bevor Sie sie in den Trockner einfüllen. So vermeiden Sie längere Laufzeit und Knitterbildung. • Wäsche ausreichend vorentwässern! Grundsätzlich gilt: Je besser Sie Ihre Wäsche vor dem Trocknen ausschleudern, desto wirtschaftlicher arbeitet der Trockner.
Umwelttips • Richtiges Trockenprogramm wählen! Wählen Sie das für Wäscheart und -menge passende Trockenprogramm. So arbeitet der Trockner am wirtschaftlichsten.
Die wichtigsten Merkmale Ihres Gerätes Die wichtigsten Merkmale Ihres Gerätes • Programm- oder Zeiteinstellung über den Programmwähler • SIGNAL zuwählbar; nach Programmende ertönt ein akustisches Signal in bestimmten Abständen • SCHON-Taste zur schonenden Trocknung empfindlicher Gewebe • Zeitvorwahl: Programmstart um 1 bis 19 Stunden aufschiebbar (z.B. auf Zeiten mit günstigerem Stromtarif) • Multidisplay zur Anzeige von –voraussichtlicher Programmdauer bzw.
Geräteaufbau Geräteaufbau Vorderansicht Bedienblende Kondensatbehälter mit Griffklappe Flusensieb Glühlampe für Innenbeleuchtung (im Trommelinnern) Typschild Luftschlitze Füße (alle höhenverstellbar) Sockelblende vor Wärmetauscher Einfülltür (Anschlag wechselbar) 13
Bedienblende A B C D E A Programmwähler: zum Einstellen des Trockenprogramms B Trockengradanzeige: zeigt den erreichten Trockengrad an; so können Sie zum richtigen Zeitpunkt einzelne Wäschestücke während des Trokkengangs entnehmen. C Tasten- und Anzeigenblock – Taste SIGNAL: Wenn zugeschaltet, ertönt akustisches Signal nach Programmende; Wäsche entnehmen – Taste SCHON: für empfindliches Gewebe – Taste TÜR: zum Öffnen der Einfülltür bei eingeschaltetem Gerät.
Vor dem ersten Trocknen Der Programmwähler • Stellung AUS: Wäschetrockner ist ausgeschaltet • Stellung BELEUCHTUNG: bei geöffneter Einfülltür wird die Trommelbeleuchtung eingeschaltet • Programmgruppe BAUMWOLLE: Hier finden Sie die Programme zum Trocknen von Baumwoll- und Leinengewebe; Füllgewicht bis 5kg. • Programmgruppe MISCHGEWEBE: Hier finden Sie alle Programme zum Trocknen von Mischgewebe und Synthetiks; Füllgewicht bis 2,5kg.
Kurzanleitung Kurzanleitung • Wäsche möglichst gründlich vorentwässern. • Wäsche vorbereiten. • Wäsche einfüllen. • Trockenprogramm einstellen – am Programmwähler – eventuell über die Tasten SIGNAL und SCHON. • Startzeit vorwählen? • Programm starten. Während das Programm läuft, können Sie die Einfülltür öffnen, um Wäsche zu entnehmen oder nachzulegen. Nach Programmende: • Wäsche entnehmen. • Kondensatbehälter leeren. • Flusensieb reinigen.
Trocknen Trocknen Wäsche vorbereiten • Zur Verhinderung von Wäscheknäueln: Reißverschlüsse schließen; Bettund Kissenbezüge zuknöpfen; lose Bänder, etwa von Schürzen, zusammenbinden. • Taschen leeren. • Metallteile (Büroklammern, Sicherheitsnadeln, …) entfernen. • Kleidung aus doppelschichtigem Gewebe wenden (etwa bei baumwollgefütterten Anoraks die Baumwollschicht nach außen). Diese Gewebe trocknen dann besser. • Wäsche auflockern.
Trocknen Eventuell die Tasten SIGNAL oder SCHON wählen. • SIGNAL-Taste Während der Knitterschutzphase (im Anschluß an die Trocknung) ertönt in bestimmten Abständen ein akustisches Signal (siehe „Ende des Trockengangs“). • SCHON-Taste Das eingestellte Programm wird mit verminderter Heizleistung ausgeführt. Drücken Sie die SCHON-Taste bei Textilien mit dem Pflegekennzeichen '. Auch bei temperaturempfindlichen Textilien (etwa Acryl und Viskose) empfiehlt sich schonendes Trocknen.
Trocknen Startzeitvorwahl Mit der Startzeitvorwahl können Sie den Start des Trockenprogramms in einem Bereich von 1 bis 19 Stunden vorprogrammieren. Programm einstellen. Taste ZEITVORWAHL solange drücken, bis die gewünschte Anzahl der Stunden bis zum Programmstart im Anzeigefeld LAUFZEIT angezeigt wird. Taste START/PAUSE drücken. Nach der eingestellten Anzahl von Stunden beginnt der Trockner automatisch das eingestellte Trockenprogramm.
Trocknen Wäsche herausnehmen oder nachlegen Sie können jederzeit den Trockengang unterbrechen, um Wäsche zu entnehmen oder nachzulegen. Einfülltür öffnen. Vorsicht! Wäsche und Trommel können heiß sein. Wäsche entnehmen oder nachlegen. Einfülltür schließen. Taste START/PAUSE drücken, um den Trockengang fortzusetzen. Ende des Trockengangs Kurz vor Ende des Trockengangs setzt die Abkühlphase ein: Die Heizung ist in dieser Phase ausgeschaltet.
Trocknen Kondensatbehälter entleeren Vorsicht! Das Kondensat ist nicht zum Trinken oder zur Verwendung in Lebensmitteln geeignet. Machen Sie es sich zur Angewohnheit, den Kondensatbehälter nach jedem Trockengang zu entleeren. So vermeiden Sie, daß der Trockengang automatisch unterbrochen wird, weil der Kondensatbehälter gefüllt ist. In Griffklappe des Kondensatbehälters greifen und Kondensatbehälter ganz herausziehen. Verschluß des Kondensatbehälters zur Seite schieben und Kondensat ausgießen.
Trocknen Flusensieb reinigen Um eine ungehinderte Luftzirkulation während des Trockengangs zu gewährleisten, müssen Sie nach jedem Trockengang das Flusensieb reinigen. Überprüfen Sie auch, ob sich Wäscheabrieb oder Rückstände in der Trommel befinden und entfernen Sie diese sofort. Entriegelungstaste des Siebdeckels nach unten drücken. Der Siebdeckel springt auf. Flusensieb entnehmen. Flusen vom Flusensieb entfernen, am besten mit angefeuchteter Hand. Flusensieb wieder einsetzen.
Programmtabellen Programmtabellen Programmgruppe BAUMWOLLE Pflegesymbole &, %; Füllmenge bis 5kg Programm EXTRATROCKEN Wäscheart dicke oder mehrlagige Textilien, die durchgetrocknet werden sollen.
Programmtabellen ZEIT-Programme Pflegesymbole &, '1, %; Füllmenge unter 1kg Sie können zwischen der Programmdauer 20, 40 und 60 Minuten wählen, um einzelne Wäschestücke nachzutrocknen oder um kleine Füllmengen zu trocknen. 1) SCHON-Taste drücken! Programm Lüften Die Wäsche wird für 10 Minuten im Kaltluftstrom behandelt; zum Glätten zerknitterter Oberbekleidung.
Eine kleine Textilkunde Eine kleine Textilkunde Pflegesymbole Prüfen Sie, ob Ihre Textilien zum Trocknen geeignet sind. Auf dem Pflegekennzeichen-Etikett sollte eines der folgenden Symbole zu finden sein: % Grundsätzlich ist das Trocknen im Trockner möglich; der Textilhersteller legt nicht fest, ob das betreffende Wäschestück normal oder schonend getrocknet werden kann.
Reinigen und Warten Reinigen und Warten Wärmetauscher reinigen Achtung! Wenn Anzeige WÄRMETAUSCHER leuchtet, müssen Sie unbedingt den Wärmetauscher reinigen. Andernfalls kann Ihr Trockner Schaden nehmen. Und mit verflustem Wärmetauscher verbraucht er mehr Energie. Einfülltür öffnen. Sockelblende durch Drücken der beiden Laschen entriegeln und abnehmen. Beide Sicherungsscheiben jeweils eine Vierteldrehung nach außen drehen. Wärmetauscher am Griff aus dem Sockel herausziehen.
Reinigen und Warten Siebbereich reinigen Ein minimaler Anteil der Flusen gelangt trotz des Flusensiebs in den umgebenden Siebbereich. Reinigen Sie deshalb von Zeit zu Zeit – mindestens jedes Vierteljahr – den gesamten Siebbereich. Flusensieb entnehmen. Siebdeckel oben anfassen und nach vorn ziehen, bis er sich aus den beiden Halterungen löst. Flusen aus dem gesamten Siebbereich entfernen – am besten mit dem Staubsauger.
Was tun, wenn ...? Was tun, wenn ...? Versuchen Sie im Störungsfall mit Hilfe der hier aufgeführten Hinweise das Problem selbst zu beheben. Wenn Sie bei einer der hier aufgeführten Störungen oder zur Behebung eines Bedienfehlers den Kundendienst in Anspruch nehmen, erfolgt der Besuch des KundendienstTechnikers auch während der Garantiezeit nicht kostenlos.
Was tun, wenn ...? Problem mögliche Ursache Netzstecker ausgesteckt Die Einfülltür läßt sich nicht mit der Taste TÜR öffnen Abhilfe Netzstecker einstecken Ein Programm einstellen.
Was tun, wenn ...? Wenn Sie zur Behebung einer Störung in dieser Gebrauchsanweisung keinen Hinweis finden, wenden Sie sich bitte an den Kundendienst. Glühlampe auswechseln Besorgen Sie sich über den Kundendienst eine Speziallampe für Ihren Lavatherm (ET-Nr. 647072580). Warnung! Verwenden Sie auf keinen Fall Standardlampen zum Einsatz in Ihrem Lavatherm! Diese entwickeln zu viel Wärme, was zu einem übermäßigen Wärmestau unter der Lampenabdeckhaube und zu Beschädigungen führen kann.
Türanschlag wechseln Türanschlag wechseln Falls der Türanschlag den örtlichen Verhältnissen nicht entspricht, ist es möglich, den Türanschlag zu wechseln. Warnung! Vor dem Wechsel des Türanschlags Netzstecker ziehen; bei Festanschluß: Sicherung herausdrehen bzw. ausschalten. Gehen Sie zum Wechsel des Türanschlags wie folgt vor: ACB F E H D J JGG F E ACB Schrauben A an der Gerätevorderwand herausdrehen. Tür durch waagerechtes Verschieben entnehmen.
Türanschlag wechseln Türverschluß H abschrauben, herausnehmen und Stecker abziehen. Gerastete Verschlußabdeckung J herausnehmen und Stecker abziehen. Türverschluß H und Verschlußabdeckung J auf der jeweils gegenüberliegenden Seite mit dem Stecker verbinden, in die Öffnung einsetzen und anschrauben bzw. einrasten lassen. Tür mit den Scharnieren in die dafür vorgesehenen Öffnungen in der Gerätevorderwand schieben und festschrauben.
Programmiermöglichkeiten Programmiermöglichkeiten Durch die elektronische Steuerung Ihres Wäschetrockners haben Sie die Möglichkeit, einige Funktionen des Trockners dauerhaft an Ihre Bedürfnisse anzupassen.
Programmiermöglichkeiten Ziel Durchführung Wenn die Wasserqualität in Ihrem Haushalt extrem stark von der Norm abweicht und Sie die Trockengraderkennung des Trockners an Ihre Wasserqualität anpassen wollen: 1) Programmwähler in Stellung BELEUCHTUNG bringen. 2) Taste ZEITVORWAHL fünf Sekunden gedrückt halten.
Technische Daten Technische Daten HöhexBreitexTiefe 85x60x60cm Tiefe bei geöffneter Tür 117cm Höhenverstellbarkeit 1,0/–0,4cm Leergewicht ca. 46kg Füllmenge (programmabhängig) max. 5kg (Abweichende Füllgewichtsangaben in einigen Ländern sind durch unterschiedliche Meßmethoden bedingt) Energieverbrauch nach IEC 1121 s.e.
Sonderzubehör Sonderzubehör Über den AEG-Kundendienst oder Ihren Fachhändler können Sie folgendes Sonderzubehör beziehen: Bausatz externer Kondensatablauf Mit diesem Bausatz (E-Nr. 916 019 000) können Sie das Kondensat bei einer maximalen Förderhöhe von 1m ab Standfläche des Trockners direkt in einen Ablauf (Waschbecken, Siphon, Gully) leiten (3m Länge). Die Entleerung des Kondensatbehälters entfällt. Die Anzeige BEHÄLTER an jedem Programmende können Sie dann ignorieren.
Stichwortverzeichnis A S Abkühlphase . . . . . . . . . . . . . . . . . . . . . . . . 20 Acryl . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 25 Anorak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Anschluß . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Aufstellung . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Ausschleudern der Wäsche . . . . . . . . . . . . 10 Schaumgummi . . . . . . . . . . . . . . . . . . . . . . . . 6 Schließen der Einfülltür . . . . . . .
Service Im Kapitel „Was tun, wenn …“ sind einige Störungen zusammengestellt, die Sie selbst beheben können. Sehen Sie im Störungsfall zunächst dort nach. Wenn Sie dort keine Hinweise finden, haben Sie zwei Möglichkeiten: • Haben Sie eine technische Störung? Dann wenden Sie sich an Ihre Kundendienststelle. Die ist in Ihrer Nähe und kann – wenn dies erforderlich ist – schnell zur Stelle sein. (Adressen und Telefonnummern finden Sie im Verzeichnis „Garantiebedingungen/Kundendienststellen“.
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.