User manual

Program progress

The display indicates the

stage of the program that is

currently being performed as

well as the time of the end

of the program.

3 During the washing cycle the

time of the end of the pro-

gram may change as the

program adjusts itself to different conditions (e. g., type and quantity

of laundry, out of balance spin detection, special rinses, etc.).

Interrupting a program/adding washing

Interrupting a program

• The wash program can be interrupted at any time by pressing

the START/PAUSE key. It is then re-started by pressing the key again.

• To stop the washing machine before the program has ended, turn the

program knob to OFF.

Important: Be careful if there is water in the appliance!

Adding washing

1. Press the START/PAUSE key.

• If “Door locked” and “Pause” are alternately shown in the display, it is

no longer possible to add washing, e. g. when the water level is too

high.

• If “Door openable” and “Pause” are alternately shown in the display, it

is still possible to add washing:

2. Open the door.

3. Add washing and close the door again.

4. Press the START/PAUSE key again. The program continues.

Washing cycle complete/Removing the washing

At the end of the cycle a long acoustic signal sounds 3 times (when the

SOUND setting is NORMAL or LOW) and the messages “Cycle ended”

and “Door openable” appear alternately in the display.

1. Open the door and remove the washing.

2. Turn the programme knob to OFF.

LINEN/EASY CARE

12.45

Washing

14.37

50C 800 aýýýýýaýaýaýaýaýaýaýaýa

TEMP. RPM OPTIONS OK TIME