User manual

15
Programme progress
The programme progress display shows the programme step that is
currently being performed.
The multi-display indicates the estimated time remaining (in minutes)
until the end of the programme.
3 During the washing cycle the remaining time may be increased or stay
the same for a while as the programme adjusts itself to different condi-
tions (e. g. type and quantity of laundry, out of balance spin detection,
special rinses, etc.).
Interrupting a programme/adding washing
Interrupting a programme
A washing programme can be interrupted at any time by pressing the
START/PAUSE button. It is then re-started by pressing the START/
PAUSE button again.
To stop the washing machine before the programme has ended, turn
the programme knob to OFF. Important! Be careful if there is water
in the appliance!
Adding washing
It is possible to add washing, as long as the DOOR light is lit green.
1. Press the START/PAUSE button. The door can be opened.
2. Shut the door and press the START/PAUSE button again. The pro-
gramme continues.
End of the wash cycle/removing the washing
At the end of the programme, END lights up on the programme
progress display. The door can be opened as soon as the DOOR indicator
is lit green.
1. Open the loading door and remove the washing.
2. Turn the programme knob to OFF.
3. After washing, pull out the detergent drawer a little to enable it to dry
out. Keep the loading door very slightly open so that the washing ma-
chine can air.