User manual

15
PRE WASH
Warm pre-wash before the main wash, which follows automatically; in-
termediate spin in the COTTONS/LINEN and EASY-CARES programmes;
no intermediate spin in the DELICATES programme.
STAIN
For heavily soiled or stained washing. In-wash stain treatment products
are washed in at the optimum time as the programme progresses.
Can only be set with wash temperatures of 40°C and above, as stain
treatment products are only effective at higher temperatures.
SENSITIVE
Enhanced rinse action through an additional rinse cycle together with
decreased drum movement (improved fabric care). Ideal when frequent
washes are necessary, e. g. in cases of over-sensitive skin.
Setting the delay timer
3 With the TIME DELAY button you can postpone the start of a pro-
gramme by 30 minutes (30') to a maximum of 23 hours (23h).
1. Select programme.
2. Continue pressing the TIME DELAY button until the desired start delay
is displayed in the multi-display, for example12h, if the start of the
programme is to be delayed by 12 hours. TIME DELAY light is lit.
3 If the display is showing 23h and you press the button again, the time
delay will be cancelled. 0' appears followed by the duration of the set
wash programme.
3. To activate the time delay, press the START/PAUSE button. The remain-
ing time till the programme start is being shown (e. g. 12h, 11h, 10h, ...
30
' etc.).
Starting a programme
1. Check that the tap is turned on.
2. Press the START/PAUSE button. The programme is started or starts after
the time delay set has elapsed.
3 If after the START/PAUSE button has been pressed E40 flashes in the
multi-display, the END indicator flashes 4 times and at the same time
an acoustic signal sounds 4 times, the door is not closed properly. Push
the door firmly closed and press the START/PAUSE button again.