User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. CONDITIONS OF USE
- 3. SAFETY INSTRUCTIONS
- 4. PRODUCT DESCRIPTION
- 5. CONTROL PANEL
- 6. PROGRAMMES
- 7. SETTINGS
- 8. OPTIONS
- 9. BEFORE FIRST USE
- 10. DAILY USE
- 10.1 Activating the appliance
- 10.2 Loading the laundry
- 10.3 Filling the detergent and additives
- 10.4 Check the position of the flap
- 10.5 Setting a programme
- 10.6 Starting a programme without the delay start
- 10.7 Behaviour of the appliance
- 10.8 Starting a programme with the delay start
- 10.9 Cancelling the delay start
- 10.10 Interrupting a programme and changing a option
- 10.11 Cancelling a running programme
- 10.12 Opening the door
- 10.13 End of cycle
- 10.14 Draining water out after end of cycle
- 10.15 AUTO Stand-by option
- 11. HINTS AND TIPS
- 12. CARE AND CLEANING
- 13. TROUBLESHOOTING
- 14. EMERGENCY DOOR OPENING
- 15. TECHNICAL DATA
Programme
Spin
Stain
s
1)
Extra
Rinse
2)
Time
Save
3)
Delay
Start
Super Eco ■ ■ ■ ■
Economy
■ ■ ■ ■
■
4)
■
1)
The Stain option is not available with a temperature lower then 40°C.
2)
If you set Extra Rinse option, the appliance adds some additional rinses. In the Rinse programme, if
you set a low spin speed the appliance performs delicate rinses and a short spin.
3)
If you set a shorter duration, we recommend that you decrease the load size. It is possible to fully load
the appliance, however the washing results are reduced.
4)
For this programme you can set only the Extra Quick duration.
7. SETTINGS
7.1 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Stains and Extra Rinse at
the same time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
7.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
press Temperature and Spin at the
same time until the indicator
comes on/goes off.
You can activate this option:
• After you press Start/Pause : the
options and the programme knob are
locked.
• Before you press Start/Pause : the
appliance cannot start.
7.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Delay Start and Time Save at
the same time until the indicator Extra
Rinse comes on/goes off.
8. OPTIONS
8.1 Programme knob
Turn this knob to set a programme. The
related programme indicator comes on.
8.2 Start/Pause
Press button Start/Pause to start or
interrupt a programme.
8.3 Delay Start
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator
and delay time.
8.4 Time Save
With this option you can decrease the
programme duration.
ENGLISH 11