User manual

21
use
● If you cannot open the door but you need to open it, you have to switch the
machine off by turning the selector dial to O/OFF. After some minutes the
door can be opened (pay attention to the water level and
temperature!).
After closing the door, it is necessary to select the programme again and to press
button
7.
At the end of the programme
The machine stops automatically, the pilot light of button 7 goes off, a flashing
0 appears on the display and the acoustic signal sounds for some minutes.
If you have choosen a programme with Rinse Hold or Night Cycle option
selected, the door symbol on the display remains lit and the door is locked
follow the below instruction to empty the water out:
● turn the programme selector dial to O/OFF
● select the DRAIN (DESCARGA) or SPIN (CENTRIFUGAR) programme
● reduce the spin speed if needed, by pressing the relevant button
● press the button 7
● when the programme has finished the display shows a flashing 0. On the display
the DOOR symbol disappears and the door can be opened.
Turn the programme selector dial to O/OFF to switch the machine off. Remove
the laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the
door open to prevent the formation of mildew and unpleasant smells.
132962560_EN.qxd 28/08/2008 14.58 Pagina 21