User manual

8. Put the cap back on the emergency emp-

tying hose and place the latter back in

its seat.

9. Screw the pump fully in.

10. Close the pump door.

WARNING!

When the appliance is in use and depending on the programme selected there can be hot

water in the pump. Never remove the pump cover during a wash cycle, always wait until

the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is

securely retightened so as to stop leaks and young children being able to remove it.

Cleaning the water inlet filters

If the appliance doesn't fill, takes long to fill water, the starting button blinks yellow or the

display (if available) shows the relevant alarm (see chapter "What to do if..." for more details),

check if the water inlet filters are blocked .

To clean the water inlet filters:

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff

brush.

4. Screw the hose back onto the tap. Make

sure the connection is tight.

5. Unscrew the hose from the machine. Keep

a rug nearby because some water may

flow.

6. Clean the filter in the valve with a stiff

brush or with the piece of cloth.

Care and cleaning