User manual

This option is recommended for heavily soiled laundry.

STAIN option

Select this option to treat heavily soiled or stained laundry with stain remover (extended

main wash with time optimized stain action phase). The relevant symbol will appear on the

display.

This option is not available with a temperature lower than 40°C.

If you wish to perform a programme with the stain option, pour stain remover into stain

compartment

marked with an arrow.

SENSITIVE option

By selecting this option the washing intensity will be reduced. The machine adds one rinse

in the programmes for cottons and synthetics. The relevant symbol will appear on the dis-

play.

This option cannot be selected together with Extra Rinse option.

This option is recommended for non fast coloured items and for frequently washed items.

EXTRA RINSE option (additional rinse)

This appliance is designed for saving water. However, for people with a very delicate skin

(allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of

water (extra rinse). The relevant symbol will appear on the display and this option is active

for selected washing programme.

If you wish to activate this option permanently press simultaneously buttons 2 and 3 for

some seconds: the relevant symbol appears on the display. If you wish to cancel it press the

same buttons until the symbol disappears.

Select the TIME SAVING option (Button 6)

This option allows you to modify the washing time, automatically proposed by the appli-

ance.

By pressing this button you can select the following options:

• DAILY: by pressing button 6 once, the relative pilot light comes on and the washing du-

ration will be reduced to wash daily soiled laundry.

• SUPER QUICK: by pressing button 6 twice, the relative pilot light remains lit, the washing

duration will be reduced to wash lightly soiled laundry or items that have been used or

worn for a short time. On the display will be visualized the decreased washing time.

Select the START/PAUSE (button 7)

To start the selected programme, press the button 7, the corresponding red pilot light stops

blinking.

The DOOR symbol appears on the display to indicate that the appliance has started operat-

ing and the door is locked.

To interrupt a programme which is running, press the button 7: the corresponding red pilot

light starts blinking.

To restart the programme from the point at which it was interrupted, press the button 7

again. If you have chosen a delayed start the machine will begin the countdown.

If an incorrect option is selected, the yellow pilot light of the button 7 blinks 3 times and

the message Err is displayed for a few seconds.

Daily use