LAVAMAT 63800 Lave-linge Informations pour les utilisateurs
Chère cliente, cher client, Veuillez lire attentivement cette notice d’utilisation dans son intégralité et la conserver pour une éventuelle consultation ultérieure. Veuillez la transmettre au propriétaire ultérieur éventuel de l’appareil. 1 3 2 2 Les symboles suivants sont utilisés dans ce document : Consignes de sécurité Avertissement ! Consignes concernant votre sécurité personnelle. Avertissement ! Consignes permettant d’éviter d’endommager l’appareil.
Sommaire Mode d'emploi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description de l’appareil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Bandeau de commande . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Synoptique des programmes . . . . . . . . . . . . . . . .
Instructions de montage et de raccordement . . . . . . . . . . . 27 Consignes de sécurité pour l’installateur . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Installation de l’appareil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transport de l’appareil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Enlevez les protections de transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mode d'emploi 1 Sécurité Avant la première mise en service • Veuillez respecter les “Instructions d’installation et de raccordement”. • Si la livraison de l’appareil a lieu au cours des mois d’hiver par des températures au-dessous de zéro : avant de mettre le lave-linge en service, l’installer dans un lieu à température ambiante pendant 24 heures. Consignes d’utilisation • Le lave-linge est uniquement destiné au lavage de linge domestique usuel.
Consignes générales de sécurité • Le montage et le branchement de l’appareil sont du ressort exclusif de spécialistes agréés. • Ne jamais mettre le lave-linge en service lorsque le câble d’alimentation électrique est endommagé ou bien lorsque le bandeau de commande, le plan de travail ou le socle sont endommagés de telle sorte que l’intérieur de l’appareil présente une ouverture accessible. • Mettre le lave-linge hors service avant tous travaux de nettoyage, d’entretien ou de maintenance.
Description de l’appareil Bac-tiroir pour produits lessiviels Bandeau de commande Plaque signalétique (derrière le hublot) Pieds vissables (ajustables en hauteur) Trappe du socle/ Pompe de vidange Bandeau de commande Touche essorage/ARRÊT CUVE PLEINE Multiafficheur Touche DEPART DIFFERE Touches de programmes Voyant PORTE additionnels Touche MARCHE/PAUSE Affichage du déroulement du programme Programmateur 7
Synoptique des programmes TACHES 1300 700 n (ARRET CUVE PLEINE) Vitesse d’essorage PRELAVAGE Programmes additionnels • • • • • •3) • •4) • • • • • • •4) • • 1kg • • • • • • LINGE DELICAT 40, 30 3kg • • • • • LAINE/SOIE H (lavage à la main) 40, 30, X (froid) 2kg • • RINCAGE DELICAT 3kg • • RINCAGE + ECO 2) 6kg • BLANC/COULEURS 95, 60, 50, 40, 30 6kg • SYNTHETIQUES 60, 50, 40, 30 3kg SANS REPASSAGE 40 COURT Charge max.
Utilisation/Caractéristiques Programme en mode économie d’énergie à 60 °C pour blanc/couleurs en coton/ lin peu à normalement sale. Etiquettes d’entretien1) MO Programme pour linge blanc/couleurs en coton/lin normalement sale à très sale. JMO Programme pour textiles mélangés faciles d’entretien et pour synthétiques. IKN Programme spécial à 40 °C pour textiles mélangés qui ne nécessitent pas de repassage ou seulement un repassage rapide après ce programme.
Avant la toute première lessive 1. Ouvrez la boîte à produits. 2. Versez env. 2 litres d’eau dans le lave-linge par l’intermédiaire de la boîte à produits. Ainsi, lors du démarrage ultérieur du programme, la cuve à lessive sera fermée et l’écluse ECO pourra fonctionner correctement. 3. Effectuez une lessive préliminaire sans introduire de linge dans l’appareil afin d’éliminer d’éventuels résidus de fabrication susceptibles d’être restés dans le tambour ou dans la cuve à lessive.
Effectuer un programme de lavage Ouvrir la porte/Charger le tambour 1. Ouvrir la porte : tirer sur la poignée de la porte.
• Si le fabricant n’indique aucun dosage particulier pour les petites quantités de linge : Pour un demi-chargement, utiliser un tiers de moins que le dosage recommandé, pour un chargement réduit, n’utiliser que la moitié du dosage recommandé pour les lavages à pleine charge. • A partir d’une dureté de l’eau de 2 (= moyenne), il est indispensable d’utiliser un anti-calcaire. La lessive peut alors être dosée pour une dureté de l’eau de 1 (=peu dure).
Mettre en marche la machine/Sélectionner le programme 3 Régler le programme et la température à l’aide du sélecteur de programme. Dès que vous avez sélectionné un programme, mettez immédiatement la machine en marche. – Le voyant de déroulement du programme indique les étapes du programme qui seront exécutées par ce dernier. – La durée prévue du programme est indiquée sur l’afficheur multiple (en minutes).
Sélectionner les compléments de programme 3 Si vous le souhaitez, vous pouvez appuyer sur le(s) bouton(s) des compléments de programme. Le voyant correspondant s’allume. Si “Err” apparaît sur l’afficheur multiple, cela indique que le complément de programme sélectionné n’est pas compatible avec les programme de lavage choisi. RINCAGE + Pour les programmes ECO, BLANC/COULEURS, LINGE DELICAT, SYNTHETIQUES et SANS REPASSAGE, deux cycles de rinçage supplémentaires auront lieu (par ex.
Régler le départ différé 3 3 La touche DEPART DIFFERE vous permet de décaler le démarrage d'un programme de 30 minutes (30') à 23 heures max. (23h). 1. Sélectionner un programme. 2. Appuyer plusieurs fois sur la touche DEPART DIFFERE jusqu'à ce que le décalage souhaité pour le démarrage du programme soit indiqué sur l'afficheur mutiple, par ex. 12h, si vous souhaitez que le programme démarre dans 12 heures. Le voyant DEPART DIFFERE s’allume.
Interrompre le programme/ Introduire du linge supplémentaire Interrompre le programme • En appuyant sur le bouton MARCHE/PAUSE, vous pouvez interrompre un programme à tout moment et le poursuivre en appuyant à nouveau sur le bouton MARCHE/PAUSE. • En cas d’interruption anticipée d’un programme, placez le sélecteur de programme sur ARRÊT.
Sécurité enfants Lorsque la sécurité enfants est enclenchée, le hublot ne peut plus être fermé. Activer la sécurité enfants : Tourner le bouton rotatif (du côté intérieur du hublot) à l’aide d’une pièce de monnaie dans le sens d’une aiguille d’une montre jusqu’à la butée. 1 Avertissement ! Après le réglage, le bouton rotatif ne doit pas se trouver en position inclinée, sinon la sécurité enfants n’est pas activée. Le bouton doit ressortir comme sur la figure.
Boîte à produits lessiviels Il est recommandé de nettoyer régulièrement la boîte à produits. 1. Tirez d’un coup sec sur la boîte à produits. 2. Enlevez l’élément supérieur du compartiment pour asssouplissant. 3. Nettoyez tous les éléments avec de l’eau. 4. Repoussez l’élément pour assouplissant jusqu’à la butée de sorte qu’il soit correctement en place. 5.
Que faire quand... Résoudre soi-même les petits défauts Si, pendant le fonctionnement de la machine, l’un des codes d’erreur suivants apparaît sur l’afficheur multiple : – E10 (Problèmes avec l’arrivée d’eau), – E20 (Problèmes de vidange de l’eau), – E40 (Porte ouverte), reportez-vous au tableau suivant. Une fois que le problème aura été résolu, appuyer sur le bouton MARCHE/PAUSE. Pour les autres problèmes (E et chiffre ou lettre) : Eteindre puis remettre la machine en marche.
Problème E10 s’affiche. Le voyant FIN clignote 1x, et émet en même temps 1x un signal sonore. (Problèmes avec l’arrivée d’eau) Le lave-linge vibre ou il est instable lorsqu’il est en marche. Cause possible Solution Robinet d’arrivée d’eau fermé. Ouvrir le robinet d’arrivée d’eau. Filtre du raccord du flexible d’arrivée d’eau bouché. Fermer le robinet d’arrivée d’eau. Dévisser le flexible, retirer le filtre et le nettoyer. Robinet d’arrivée d’eau entartré ou défectueux.
Problème E20 s’affiche. Le voyant FIN clignote 2x, et émet en même temps 2x un signal sonore. (Problèmes avec la vidange de l’eau) Cause possible Flexible de vidange de l’eau coudé. Déplier le flexible. Hauteur de pompe maximum de 1m dépassée. Contacter le service aprèsvente. Pompe à lessive bouchée. Eteindre la machine. Retirer la prise secteur. Nettoyer la pompe à lessive. Retirer tout corps étranger du corps de la pompe. Au niveau du raccordement du siphon : le siphon est bouché.
Si la qualité du lavage n’est pas satisfaisante Le linge est grisâtre et du calcaire se dépose dans le tambour • Le dosage du produit de lavage est insuffisant. • Le produit de lavage utilisé est inadéquat. • Les salissures spécifiques n’ont pas fait l’objet d’un traitement préalable. • Le programme ou la température sélectionnés ne sont pas appropriés.
Effectuer une vidange de secours 1 Avertissement ! Avant de commencer une vidange de secours, mettre le lave-linge hors tension et le débrancher ! Avertissement ! L’eau de lavage qui s’écoule du flexible de vidange de secours peut être brûlante. Danger de brûlure par aspersion ! Laisser refroidir l’eau de lavage avant de procéder à une vidange de secours ! 1. Soulever le clapet du socle et le retirer. 2. Sortir le flexible de vidange de secours. 3. Placer une coupelle sur le sol.
Pompe de vidange 1 La pompe de vidange ne nécessite aucun entretien. Il n’est pas nécessaire d’ouvrir le couvercle de la pompe, excepté en cas de dysfonctionnement ou que la vidange s’interrompt comme par ex. lorsque la roue de la pompe est bloquée. Avant d’introduire le linge, veuillez toujours vérifier qu’il ne reste aucun élément étranger dans les poches ou entre les vêtements. Les trombones, épingles, etc.
7. Fermer le flexible de vidange de secours et le placer sur son support. 8. Fermer le clapet du socle. Protection de l’environnement 2 2 Elimination du matériel d’emballage Les matériaux d’emballage sont écologiques et recyclables. Les matières plastiques portent un signe distinctif, par ex. >PE<, >PS<, etc. Eliminez les matériaux d’emballage en fonction de leur signe distinctif dans les containeurs prévus à cet effet sur le site de collecte de votre commune.
Caractéristiques techniques 5 Cet appareil est conforme aux directives CE suivantes : – directive 73/23/CEE du 19.02.1973 basse tension – directive 89/336/CEE du 03.05.1989 relative à la compatibilité électromagnétique (CEM) y compris la directive de révision 92/31/CEE – directive 93/68/CEE du 22.07.1993 relative à la certification CE Hauteur x largeur x profondeur 850 x 598 x 603mm Profondeur, hublot ouvert 980 mm Réglage de la hauteur env. +10/-5mm Charge maximale (en fonction du programme) max.
Instructions de montage et de raccordement 1 Consignes de sécurité pour l’installateur • Ce lave-linge n’est pas encastrable. • Avant de le mettre en service, vérifier qu’il n’ait pas subi de dommages pendant le transport. Ne brancher en aucun cas un appareil endommagé. En cas de dommages, veuillez contacter votre concessionnaire. • Avant la mise en service, retirer tous les éléments du dispositif de sécurité.
Installation de l’appareil Transport de l’appareil 1 Avertissement ! Le lave-linge est très lourd. Risque de blessures ! Le soulever avec précaution. • Ne pas poser l’appareil sur la face frontale ou sur le côté droit (vu de devant). Les éléments électriques peuvent se mouiller. • Ne jamais transporter l’appareil sans dispositif de sécurité.
2. Redressez l'appareil et retirez la fixation du câble d’alimentation électrique et du tuyau de vidange des leur support placé à l’arrière de l’appareil. 3. Avec une clé dévissez et ôtez la vis centrale arrière A, en haut. Enlevez avec soin le goujon en plastique correspondant. 4. Dévissez et ôtez les deux grandes vis arrière B et les six petites vis C, en bas.
5. Sortez le rail de transport D. 6. Revissez les six petites vis C à leur place (voir figure ci-desssous). 7. Ouvrez le hublot et enlevez le bloc en polystyrène accroché avec du ruban adhésif au joint du hublot. 8. Bouchez l’ ouverture centrale et les deux ouvertures (en bas) à l’aide des caches plastique se trouvant dans l’enveloppe contenant la notice d’utilisation.
portez jamais l’appareil sans les protections de transport. Branchez le tuyau d’alimentation de la façon décrite au paragraphe “Raccordement d’eau”. Préparer le lieu d’installation Avertissement ! Ne pas installer l’appareil dans une pièce où il est susceptible de geler. Risque de dommages dus au gel ou altération des fonctions de l’appareil ! Les dommages dus au gel ne sont pas couverts par la garantie ! • Le plan d’installation doit être stable et plat.
Raccordement de l’eau Pression d’eau admissible La pression d’eau admissible est d’au moins 1bar (=10N/cm2 =0,1MPa) et ne doit pas excéder 10bar (=100N/cm2 =1MPa). – Si la pression excède 10bar : installer une vanne de réduction de la pression en amont. – Si elle est inférieure à 1bar : dévisser le flexible d’arrivée d’eau côté appareil au niveau de l’électrovanne et enlever le régulateur de débit (pour ce faire, retirer le filtre à l’aide d’une pince pointue et extraire la bague en caoutchouc).
4. Vissez le raccord du tuyau d’alimentation sur le nez fileté du robinet d’arrivée d’eau (20x27). Utilisez toujours le tuyau d’alimentation livré avec l’appareil. Vissez correctement pour éviter toute fuite. Si le branchement se fait sur des tuyauteries neuves ou qui n’ont pas servi depuis longtemps, il est préférable de faire couler une certaine quantité d’eau avant de mettre en place le tuyau de remplissage.
– Avec un dispositif de vidange de l’eau dans un évier ou dans une baignoire, fixer le flexible de vidange à l’aide du coude fourni pour éviter qu’il glisse. Sinon, la pression de l’eau de vidange peut repousser le flexible hors de l’évier. – Lors de la vidange, vérifier que la vitesse d’évacuation de l’eau est suffisante. Hauteurs de refoulement supérieures à 1 mètre La pompe de vidange du lave-linge peut refouler l’eau de lavage jusqu’à une hauteur de 1mètre à partir du plan d’installation de l’appareil.
Garantie/service-clientèle Belgique DÉCLARATION DE CONDITIONS DE GARANTIE. Nos appareils sont produits avec le plus grand soin. Malgré cela, un défaut peut toujours se présenter. Notre service clientèle se chargera de réparer ceci sur demande, pendant ou après la période de garantie. La durée de vie de l'appareil n'en sera pas pour autant amputée. La présente déclaration de conditions de garantie est basée sur la Directive de l'Union Européenne 99/44/CE et les dispositions du Code Civil.
11.Si des appareils sont encastrés, sous-encastrés, fixés ou suspendus de telle sorte que le retrait et la remise en place de ceux-ci dans leur niche d'encastrement prennent plus d'une demi-heure, les frais de prestation qui en découlent seront portés en compte. Les dommages connexes causés par ces opérations de retrait et de remise en place sont à charge de l'utilisateur. 12.
Garantie Europeenne NE S'APPLIQUE PAS POUR LES APPAREILS COMMERCIALISES SUR LE TERRITOIRE FRANÇAIS. Cet appareil est garanti par Electrolux dans chacun des pays énumérés au dos de cette notice et pour la période spécifiée par la garantie ou, à défaut, par la législation en vigueur.
p t b Latvija +37 17 84 59 34 Kr. Barona iela 130/2, LV-1012, Riga Lietuva +370 5 2780609 Verkių 29, LT 09108 Vilnius Luxembourg +35 2 42 43 13 01 Rue de Bitbourg, 7, L-1273 Hamm Magyarország +36 1 252 1773 H-1142 Budapest XIV, Erzsébet királyné útja 87 Nederland +31 17 24 68 300 Vennootsweg 1, 2404 CG Alphen aan den Rijn Norge +47 81 5 30 222 Risløkkvn. 2 , 0508 Oslo Österreich +43 18 66 400 Herziggasse 9, 1230 Wien Polska +48 22 43 47 300 ul.
Service après-vente En cas de problèmes techniques, vérifiez d’abord s’il ne vous est pas possible de réparer vous-même le dysfonctionnement à l’aide de la notice d’utilisation (chapitre „Que faire, si...“). Si vous ne parvenez pas à réparer le dysfonctionnement, veuillez contacter notre Consumer Services. Pour pouvoir vous dépanner dans les plus brefs délais, nous nécessitons les informations suivantes : – Désignation du modèle – Numéro du produit (PNC) – Numéro de série (S-No.
www.electrolux.com www.aeg-electrolux.