User manual

c) Mounting the door
Fix the hinges (1) to the machine by means of the
M5x15 screws (3-Fig. B). The hinges can be
adjusted to compensate for possible uneven
thickness of the door.
To align the door perfectly it is necessary to
loosen the screw (3-Fig. B), adjust the door and
tighten the screw again.
d) Counter-magnet (6)
The appliance is pre-arranged for a magnetic clo-
sure of the door. To enable a correct operation of this device, it is necessary to
screw the counter-magnet (6) (steel disk + rubber ring) into the inner side of the
door.
Its position must correspond to the magnet (4) on the appliance (see picture D).
If the door has to be opened from left to right,
invert the position of the plates (7), the magnet
(4) and the plate (5) (Fig. B and E). Mount the
countermagnet (6) and the hinges (1) as
previously described.
42
Building-in
6
4
8
D
4
6
5
1
2
3
7
8
E
132963930.qxd 17/06/2008 14.12 Pagina 42