User manual

Starting the programme
1. Check that the water tap is open.
2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the programme will start
at the end of the countdown.
At the start of the programme, if the “END” light blinks for few min-
utes, the acoustic signal sounds and on the display appears E40, that
indicates that the door is open. Close the door and press the
START/PAUSE button again.
If the delay start option has been selected, the machine starts its
countdown, in hours, which will appear on the display. During this
period it is possible to load other laundry, to cancel the delay time.
• Load other laundry: press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Cancel the delay time: press the START/PAUSE button. Press the
DELAY TIMER button until on the display appears 0’, if you wish to
cancel it. Press the START/ PAUSE button again to let the pro-
gramme restart.
Programme progress display
By selecting the wash programme, the pilot lights correspond-
ing to the various phases making up the programme come on.
After the machine has started, only the running phase pilot
light stays on. If the pilot light / goes on, it means that
the prewash or wash cycle is running.
Display
The time to the end of the programme decreases minute by
minute and appears on the display.
78
DEUR
PORTE
SPOELEN
RINÇAGE
EXTRA SPOELEN
RINÇAGE PLUS
CENTRIFUGEREN
ESSORAGE
DROGEN
SÉCHAGE
EINDE
FIN
DEUR
PORTE
OVERDOSERING
SURDOSAGE
LOOPTIJD
TEMPS RESTANT
How to wash
132985210 gb.qxd 07/03/2005 13:54 Pagina 78