User manual

12
Display (7)
Duration of selected programme:
After selecting a programme, the duration is displayed in hours and minutes (for
example
2.05). The duration is calculated automatically on the basis of the
maximum recommended load for each type of fabric. After the programme has
started, the time remaining is updated every minute.
Selected drying time
After selecting a drying programme, the drying time is displayed in minutes
and/or hours (max 130 mins=
2.10).
After the programme has started the time remaining is updated every minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for
example
E20 (see chapter «What to do if...»).
End of programme
When the programme has finished a blinking zero 0 is displayed, the
FUNCTIONING pilot light (
10.1) and the pilot light of button 8 go out and the
door can be opened.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected,
the message Err is displayed for about 2 seconds and the yellow pilot light of
button 8 light starts blinking.
7.1
7.3
7.2
Display
7.1
132962770_EN.qxd 05/07/2008 11.46 Page 12