User manual

DISPLAY
7.2
7.3
7.1
7.1
Duration of selected programme
After selecting a programme, the duration is displayed in hours and minutes (for example
2.05). The duration is calculated automatically on the basis of the maximum recommended
load for each type of fabric. After the programme has started, the time remaining is upda-
ted every minute.
Selected drying time
After selecting a drying programme, the drying time is displayed in minutes and/or hours
(see paragraph «Drying»). After the programme has started the remaining time is updated
every minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example
(see chapter «What to do if...»).
End of programme
When the programme has finished a blinking zero
is displayed.
The DOOR light 10.3, the WASHING light 10.1 (or the DRYING light 10.2) and the light of
button 8 go out. The door can be opened.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message
Err is displayed for about 2 seconds and the yellow pilot light of button 8 light starts blink-
ing.
Delay Start
The selected delay (20 hours max) set by means of the relevant button appears on the dis-
play for about 3 seconds, then the duration of the previously set programme is displayed.
The delay time value decreases by one unit every hour. When only 1 hour remains, the time
decreases every minute.
7.2
Delay Start symbol
The symbol 7.2 will appear on the display.
7.3
Child safety lock
Display
9