User manual

4. Take hold of the coarse filter (A) by the handle with the hole and
remove from the microfilter (B).
5. Clean all filters thoroughly under running water.
6. Remove the flat filter (C) from the base of the washing
compartment and clean both faces thoroughly.
7. Put the flat filter (C)back in the base of the washing compartment,
and ensure that it fits perfectly under the two guides (D).
8. Place the coarse filter (A) in the microfilter (B) and press together.
9. Put the filter combination in place and lock by turning the handle
clockwise to the stop. During this process ensure that the flat filter
does not protrude above the base of the washing compartment.
Attention!
Under no circumstances may the dishwasher be used without filters.
Incorrect repositioning and fitting of the filters will produce poor washing
results.
NEVER try to remove the spray arms.
If residues of soil have clogged the holes in the spray arms, remove them
with a cocktail stick.
31
Operating instructions
156997 66/0en 23-10-2006 12:04 Pagina 31