User manual

WARNING!
Deactivate the appliance before you do the checks.
Malfunction Possible cause Possible solution
The appliance
does not fill with
water.
The water tap is blocked or there is
limescale on it.
Clean the water tap.
The water pressure is too low. Contact your local water authority.
The water tap is closed. Open the water tap.
The filter in the water inlet hose is
blocked.
Clean the filter.
The connection of the water inlet
hose is not correct.
Make sure that the connection is cor-
rect.
The water inlet hose is damaged. Make sure that the water inlet hose
has no damages.
The appliance
does not drain the
water.
There is a blockage in the sink spi-
got.
Clean the sink spigot.
The connection of the water drain
hose is not correct.
Make sure that the connection is cor-
rect.
The water drain hose is damaged. Make sure that the water drain hose
has no damages.
The anti-flood de-
vice is on.
Close the water tap and contact the
service centre.
The start of the
washing pro-
gramme does not
occur.
The appliance door is open. Close the appliance door.
You did not press the Start touch-
pad or button.
Press the Start touchpad or button.
The mains plug is not connected in
the mains socket.
Connect the mains plug.
The fuse in the fuse box is dam-
aged.
Replace the fuse.
The delay start is set. • Cancel the delay start.
• When the countdown is comple-
ted, the washing programme starts
automatically.
After the check, set the programme knob on the same washing programme before the
malfunction occurred. The programme continues from the point of interruption.
If the malfunction occurs again, contact the service centre.
If the display shows other alarm codes, contact the service centre.
The necessary information for the service centre is on the rating plate.
Record this information:
What to do if…
19