Before using your remote controller, please read this manual carefully and keep it for future reference.
CONTENTS Remote Controller Specification............................................... 1 Performance Features-------------------------------------------------------1 Features of the Remote controller Buttons ............................. 1 Indicators on Display panel.........................................................3 Operating the Remote Controller............................................... 4 Warning-------------------------------------------------------------------------- 7 3.
Remote Controller Specification TEMP Button : Push this button to decrease the indoor temperature setting. TEMP Button : Push this button to increase the indoor temperature setting . MODE Selection Button: Each time the button is pressed, the operation mode is shifted in the direction of the arrow: 1 Model R51L1/BGE, R51L1/BGCE Rated Voltage 3.0V(Alkaline dry batteries LR03 Lowest Voltage of CPU Emitting Signal 2.0V Transmission Distance 8m (when using 3.
TIMER OFF Button: Press this button to initiate the auto-off time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays 10:00, each press will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-off time to 0:00 LOCK Button: Push this button to lock all the current settings, push again to cancel the LOCK function.
AUTOMATIC OPERATION Switch on the power and the OPERATION indication lamp on the display panel of the indoor unit starts flashing, and turns off after flashes for 6 times. 1. Use the MODE button to select AUTO. 2. Push the TEMP button to set the desired room temperature . The most comfortable temperature settings are between 21 C o to 28 C. 3. Push the ON/OFF button to start the air conditioner. The OPERATION lamp on the display panel of the indoor unit lights.