User manual

2. Touch and hold for three seconds.
The display shows "SET1" and "1" flashes.
3. Touch
/ to set the setting.
4. Touch
.
5. Touch
/ to change the value of the setting.
6. Touch
.
Automatic switch-off
For safety reasons the appliance deactivates automatically after some time:
• if an oven function operates.
• if you do not change the oven temperature.
Oven temperature Switch-off time
30 °C -120 °C 12.5 h.
120 °C - 200 °C 8.5 h.
200 °C -250 °C 5.5 h.
250 °C -maximum °C 3.0 h.
After an automatic switch-off, touch a sensor field to operate the appliance again.
The Automatic switch-off works with all oven functions, apart from Light, Low temperature
cooking, core temperature sensor, Duration, End, Time delay.
Brightness of the display
There are two modes of display's brightness:
• Night brightness - when the appliance is off, the brightness of the display is lower be-
tween 22:00 and 06:00;
• Day brightness:
– when the appliance is on;
– if you touch any of the sensor fields during night brightness (apart from ON/OFF), the
display goes back to day brightness mode for next 10 seconds;
– if the appliance is off and you set the minute minder. When the minute minder func-
tion ends, the display goes back to night brightness;
Cooling fan
When the appliance operates, the cooling fan activates automatically to keep the surfaces
of the appliance cool. If you deactivate the appliance, the cooling fan can continue to oper-
ate until the appliance cools down.
CARE AND CLEANING
WARNING!
Refer to "Safety information" chapter.
22 Care and cleaning