User manual

41Cleaning and Care
Changing the length of time
1. Proceed as described in the section “Pyrolytic cleaning”.
2. As long as Duration is flashing, select the length you want the process to last, with
or :
– 2:15 for a light degree of soiling,
– 2:45 for a normal degree of soiling,
– 3:15 for a high degree of soiling.
Duration flashes for approx. 5 seconds.
Pyrolytic cleaning then starts.
3 If Duration is no longer flashing, press the Selection button again and then per-
form the setting procedure.
3. When the pyrolytic cleaning is complete, press any button to end.
Changing the switch-off time for the pyrolytic cleaning
The switch-off time can be delayed using the clock function End (within 2 minutes
of the pyrolytic cleaning starting).
Cleaning Reminder
The Cleaning Reminder detects when pyrolytic cleaning is required and alerts the user to
this fact.
3 The Cleaning Reminder can be switched on and off (see section “Operating the oven”).
Oven lighting
1 Warning: There is a danger of electric shock! Prior to changing the oven light bulb:
– Switch off the oven!
– Remove the fuses in the fuse box or switch off the circuit breaker.
3 Place a cloth on the oven floor to protect the oven light and glass cover.
Replacing the oven light bulb/cleaning the
glass cover
1. Remove the glass cover by turning it anti-
clockwise and then clean it.
2. If necessary:
Replace bulb with a 40 watt, 230 V, 300 °C
heat-resistant oven light bulb.
3. Refit the glass cover.