User manual

Using the Oven24
2. Using the or button, set the current
time.
After approx. 5 seconds, the clock stops flashing
and the clock displays the time of day set.
The appliance is now ready to use.
3 Heat+Hold
The Heat+Hold function keeps your prepared dish warm for 30 minutes, after the baking
or roasting process is completed.
This is helpful, for example, if your guests are late.
Pre-condition for Heat+Hold:
• Set temperature is above 80°C
Switching on Heat+Hold
1. Set clock functions Duration and/or End .
2. Press the Selection button repeatedly until the symbol Keep warm appears in the
display.
3. Press the button. “00:30:” appears in the display.
4. As soon as the oven function is completed, a signal sounds and Heat+Hold starts.
The oven function set runs at 80°C for 30 minutes.
As soon as the 30 minutes with Heat+Hold has elapsed, the oven switches itself off.
3 Irrespective of an oven function being set, Heat+Hold remains active. You can
change between the oven functions.
Cleaning Reminder for pyrolytic cleaning
The Cleaning Reminder detects when pyrolytic cleaning is required and alerts the user to
this fact through the following display.
When the oven function has been switched off, the symbol Pyroluxe flashes for ap-
prox. 10 seconds.
By pressing or at the same time, the Cleaning Reminder can be reset.