User manual

Installation Instructions50

Installation Instructions

Attention: The new appliance may only be installed and connected by a regis-

tered expert.

Please comply with this. If you do not, any damage resulting is not covered by

the warranty.

1 Safety information for the installer

• The electrical installation is to be set up so that the appliance can be isolated

from the mains with a minimum 3mm all-pole contact separation.

Suitable separation devices include e.g. cut-outs, fuses (screw fuses are to be

taken out of the holder), RCD’s and contactors.

• Anti-shock protection must be provided by the installation.

• The built-in unit must meet the stability requirements of DIN 68930.

• Built-in ovens and built-in cooking surfaces are fitted with special connection

systems. For safety reasons, they must only be combined with appliances from

the same manufacturer.