User manual

WHAT TO DO IF…
During operation of the appliance some
smaller but annoying trouble can often
occur, which does not require calling a
technician out. In the following chart infor-
mation is given about them to avoid un-
necessary charges on service.
The operation of the appliance
goes with certain sounds (com-
pressor and circulating sound).
This not means a trouble, but a
normal operation.
The appliance operates discontin-
uously, so the stopping of com-
pressor does not mean being no
current. That is why you must not
touch the electrical parts of the
appliance before breaking the cir-
cuit.
Problem Possible cause Solution
The appliance is
noisy.
The appliance is not sup-
ported properly.
Check if the appliance
stands stable (all feet and
wheels should be on the
floor). Refer to "Levelling".
The buzzer sounds.
The Alarm icon flash-
ing.
The temperature in the
freezer is too high.
Refer to "HighTemperature
Alarm".
The door is not closed cor-
rectly.
Refer to "Door open
alarm".
upper or lower
square is shown in
the temperature dis-
play.
An error has occurred in
measuring the tempera-
ture.
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not be
possible).
“dEMo” appears on
the display.
The appliance is in dem-
onstration mode.
Keep pressed approximate-
ly 10 sec the OK button
since a long sound of buz-
zer is heard and the display
shut off for a short while:
appliance start works regu-
larly.
The compressor runs
continuously.
The Temperature regula-
tor may be set incorrectly.
Set a warmer temperature.
The door is not closed cor-
rectly.
Refer to "Closing the
door".
The door has been
opened too frequently.
Do not keep the door open
longer than necessary.
The food temperature is
too high.
Let the food temperature
decrease to room tempera-
ture before storage.
The room temperature is
too high.
Decrease the room temper-
ature.
36
www.aeg.com