A92860GNX0 EN FREEZER USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 6 10 11 12 14 14 16 19 19 23 25 Safety information Control panel Ice dispenser First use Daily use Helpful hints and tips Care and cleaning What to do if… Technical data Installation Noises Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Safety information 5 – thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard. 1. 2. • • • • Power cord must not be lengthened.
Control panel • Never use a hair drier or other heating appliances to speed up defrosting. Excessive heat may damage the plastic interior, and humidity could enter the electric system making it live. Installation For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
Control panel 7 2 Temperature warmer button 3 Temperature colder button 4 OK button 5 Mode button 6 ON/OFF button It is possible to change predefined sound of buttons to a loudly one by pressing together Mode button and Temperature colder button for some seconds. Change is reversible.
Control panel Set default temperature: • -18°C for the freezer The temperature indicator shows the set temperature. The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored. Ice maker function The Ice maker is switched on at delivery and starts up automatically when the appliance is connected to water and power supplies. To switch on the function: 1. Press the Mode button until the corresponding icon appears. The Ice maker indicator flashes. 2.
Control panel 9 2. Press the Temperature colder button or the Temperature warmer button to change the Timer set value from 1 to 90 minutes. 3. Press the OK button to confirm. The Minute Minder indicator is shown. The Timer start to flash (min). At the end of the countdown the Minute Minder indicator flashes and an audible alarm sounds: 1. Remove any drinks contained in the freezer compartment. 2. Press OK button to switch off the sound and terminate the function.
Ice dispenser • flashing alarm indicator • acoustic buzzer. When normal conditions are restored (door closed), the alarm will stop. During the alarm phase, the buzzer can be switched off by pressing any button. ICE DISPENSER 1 2 3 4 5 6 1 2 3 4 5 6 Child lock indicator Locking function button Night/lighting button Photo electric sensor Paddle Illumination Child lock function The child lock function is activated at delivery.
First use 11 To activate the child lock function Press buttons 2 and 3 at the same time for about three seconds. The child lock indicator is lit when activated. Lighting The ice dispenser lighting (6) illuminates automatically when operated. For continuous lighting 1. Make sure that the ice dispenser is unlocked. 2. Press button (3) until the lighting goes on (about three seconds). Brightness is now about 50% until the dispenser is used. Switch off the lighting 1. 2.
Daily use Do not use detergents or abrasive powders, as these will damage the finish. Check that the drain hose at the rear of the cabinet discharges into the drip tray. DAILY USE Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deepfrozen food for a long time. To freeze small amount of fresh foods it is not necessary to change the present setting.
Daily use 13 Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer. Shelf above ice maker The shelf above the ice maker cannot be removed. Removing the ice container The ice container can be removed. 1. Tilt up and pull the ice container outwards to removal. When the ice container is pulled out, this stops all the functions of the ice machine. 2.
Helpful hints and tips HELPFUL HINTS AND TIPS Hints for freezing To help you make the most of the freezing process, here are some important hints: • the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate; • the freezing process takes 24 hours.
Care and cleaning 15 • regularly check the door seals and wipe clean to ensure they are clean and free from debris. • rinse and dry thoroughly. Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush.
What to do if… The absence of frost is due to the continuous circulation of cold air inside the compartment, driven by an automatically controlled fan. Periods of non-operation When the appliance is not in use for long periods, take the following precautions: 1. Switch of the ice machine 2. Turn off the water connection 3. Empty the ice container 4. Disconnect the appliance from electricity supply 5. Remove all food 6. Clean the appliance and all accessories 7.
What to do if… Problem Possible cause 17 Solution upper or lower square is shown in the temperature display. An error has occurred in measuring the temperature. Call your service representative (the cooling system will continue to keep food products cold, but temperature adjustment will not be possible). dEMo appears on the display. The appliance is in demonstration mode.
What to do if… Problem No ice. Possible cause Solution The appliance has no power. There is no voltage in the mains socket. Connect another electrical appliance to the mains socket. Check fuse. Contact a qualified electrician. The ice maker is not switched on. Refer to "Switching on and off the ice maker". No water supply. Carry out the necessary measures on the water supply. The ice dispenser lamp and Leakage in the connection box. the child look indicator flashes. The lamp does not work.
Technical data 19 TECHNICAL DATA Dimension Height 1810 mm Width 595 mm Depth 650 mm Rising Time 10 h Voltage 230 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label. Water pressure range The water pressure must be at least 1 bar (100kPa) Consult your installer if water pressure is less than 1 bar.
Installation Location To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 40 mm . Ideally, however, the appliance should not be positioned below overhanging wall units. The ventilation space can be: 50mm • directly above the appliance • behind and above the top cupboard. In this case, the space behind the top cupboard must be at least 50 mm deep.
Installation 1 Green and Yellow: Earth 3 Brown: Live 5 Blue: Neutral 21 As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and yellow. 2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. 3.
Installation Install two spacers on the back side of the panel and two spacers with adhesive on the lower part. Fitting the door handles (Example for right hinge performance) The handles are supplied as a kit at delivery. 1. Screw the top handle bracket to the handle rod. 2. Fit the bottom handle bracket on the lower left-hand side of the door. 3. Fit the top handle bracket on the top left-hand side of the door. 4. Screw the handle rod to the bottom handle bracket.
Noises Levelling When placing the appliance ensure that it stands level. If necessary adjust the feet using the adjustment spanner supplied. Door alignment is dependent on proper levelling. Starting the ice maker for the first time. Ensure proper connection to the water supply, refer to "Connecting the water hose". 1. Open the tap on the water connection. 2. Start the freezer and the ice maker starts automatically. It will start filling water when the temperature is sufficiently low.
Noises CLICK! BRRR! BLUBB! HISSS! CLICK! BRRR! BLUBB! HISSS!
Environmental concerns SSSRRR! CRACK! 25 SSSRRR! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.
www.aeg.
