User manual

11What to do if …
What to do if …
If you are unable to remedy the problem by following the above sugges-
tions, please contact your local Service Force Centre.
1 Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
3 If the appliance has been operated incorrectly, the engineer's visit will be
chargeable, even during the warranty period.
Problem Possible cause Remedy
The cooking zones are not
functioning.
The combination appliance is
not switched on.
Switch on the appliance.
The desired heat setting is not
set.
Set the heat setting.
The fuse in the house’s electri-
cal wiring (fuse box) has been
tripped.
Check the fuse.
If the fuses trip a number of
times, please call an author-
ised electrician.
The residual heat indicator is
not displaying anything
The cooking zone was only on
for a short time and is there-
fore not hot
If the cooking zone is sup-
posed to be hot, call the Cus-
tomer Service Department.
_ is lit Overheating protection for the
cooking zone has been trig-
gered
Switch off cooking zone
Switch cooking zone on again
When switching on the com-
bination appliance, the ring
switch was not in the Off posi-
tion
Cooking zone without cook-
ware for longer than two min-
utes
Switch off cooking zone, place
cookware on cooking zone,
switch cooking zone on