User's Manual

6. Screw back the bottom cover of DDR SODIMM SDRAM with two screws and the bottom
cover with four screws.
3.5 Installing the 2.5" Hard Disk Drive (HDD)
You can attach one enhanced Integrated Device Electronics (IDE) hard disk drive to the DVS-
350’s internal controller which uses a PCI localbus interface. The advanced IDE controller
supports faster data transfer and allows the IDE hard drive to exceed 528 MB.
For the automotive application and harsh(high temperature) environment installation, we
STRONGLY suggest users to use the wide-range 2.5” hard disk driver designed and
manufactured specifically for these application. As we know, Seagate EE25 Series
hard drive
and Fujitsu MHT2020AC hard drive can meet higher operating temperature (–30º to 85ºC)
and vibration tolerance (Up to 2.0 Gs). For more information about the wide-range hard drives,
we suggest you Google the “Seagate EE25 Series” and “Fujitsu MHT2020AC” on web. You
should find some useful information from the internet.
The following are instructions for installation:
1. Remove the power line first.
2. Unscrew the screws on HDD mounting bottom cover of the DVS-350