User's Manual

ACR350 Validator with QR Code Scanner – User Manual [e-mail]
Version 1.02 www.acs.com.hk
Page 17 of 61
2.3.2. Installing ACR350 using a Vertical Pole
Note: Please ensure that the components are well prepared before starting the installation.
To install the ACR350 using a vertical pole:
1. Place the rubber part on top of the metal part 1.
Note: This step is only applicable when using a 31/32mm pole. When using a 35mm pole,
please skip this step.
2. Put metal part 1 and metal part 2 on top of the pole and screw them together using PM4*20
screws (4 pieces). The order of screwing is shown on the picture below:
1
2
3
4