Use Instructions

Connectivity Overview
The Sky CI M90 sound processor can be connected to Bluetooth-enabled devices for phone calls, VoIP
calls, audio streaming, or for use with the AB Remote mobile application.
Pairing and Connecting the Sky CI M90 to a Bluetooth-Enabled Device
1. Ensure that Bluetooth wireless technology is enabled on your device (e.g., phone, tablet) and
search for Bluetooth-enabled devices in the connectivity settings menu.
2. Power on the Sky CI M90 sound processor by connecting the sound processor to a power
source. The sound processor will be discoverable by your Bluetooth-enabled device for up to
three minutes, or until it is successfully paired to a device.
3. Your device should show a list of Bluetooth-enabled devices. Select the sound processor from
the list to pair your sound processor. If you use two Sky CI M90 sound processors, selecting one
sound processor for pairing will simultaneously pair both sound processors. A beep confirms
successful pairing.
4. The connection will be maintained as long as the device remains on and within range.
After your sound processor has been paired to your Bluetooth-enabled device, the sound processor will
automatically connect again when switched on. Your sound processor can be paired to two Bluetooth-
enabled devices at a time. The paired sound processor can be unpaired from the Bluetooth device by
utilizing the Bluetooth management menu of your device.
PLEASE NOTE: Once a sound processor has been paired to a device it is recommended to keep paired
devices in silent mode to avoid dropouts related to device notifications.
Managing Bluetooth Phone Calls with the Sky CI M90