Technical Specifications
FLOOR UNITS
FEATURES:
Floor mounted unit eliminates the need of lifting heavy containers.
Tile edge furnished on the rear.
Bowls rectangular in design for increased capacity.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to a satin finish.
MATERIAL:
16 Gauge type “304" series stainless steel sink bowl.
18 Gauge type “304" series stainless steel sink apron.
FEATURES:
Leg mounted design.
High back splash.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match
adjacent surfaces and to a
satin finish.
MATERIAL:
Heavy gauge type “304" series
stainless steel.
Item #: Qty #:
Model #:
Project #:
STAINLESS STEEL
SERVICE & MOP SINKS
E-4
NEW YORK GEORGIA TEXAS NEVADA
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
9-OP-20 Shown
Conventional
Economy
8-OP-16
4-OP-18
9-OP-40 Shown
Approx.
MODEL L x W x H Wt.
K-243 32” x 4” x 6” 13 lbs.
• 16 Gauge, 300 Series Stainless Steel
• Includes Cast 1/2” Drain & Plastic Hose
• Wall Mounted (Hardware not Included)
• 2” Tray Height with 6” Rear Splash
(Overall Height)
UTILITY SHELF - 8” WIDE
inches mm MODEL
Approx Approx
Wt Cubes
24” 610 K-245 12 lbs. 1
36” 914 K-246 15 lbs. 2
SERVICE & MOP SINK ACCESSORIES
K-244 HOSE & HANGER
STANDING UNITS
MOP DRAINAGE TRAY
Height Above
MODEL Fits Units: Finished Floor (A.F.F.)
K-288LorR
9-OP-20 26”
9-OP-40 32”
K-290LorR
9-OP-28 26”
9-OP-48 32”
Splashes Available on All 3 Sides
K-298
9-OP-20 26”
9-OP-40 32”
K-299
9-OP-28 26”
9-OP-48 32”
16” HIGH SIDE & BACK
SPLASHES FOR
9-OP SERIES MOP SINKS
16 Gauge, 300 Series Stainless Steel
Available with Back & Left Side,
Back & Right Side or Back & Both Sides
(Mounting Hardware Included)
K-240
SERVICE FAUCET
K-16 FLOOR
MOP SINK
REPLACEMENT
DRAIN
K-242 MOP HANGER - 23” Wide
FLOW RATE
9.6 GPM/
36.3 LPM
8” O.C.
9-OP-40DF Shown
Notched Out Front Allows
Ease of Emptying Mop Bucket