Dish Machine Compatibility Chart

Dish Machine coMpatibility chart
The Following Dish Machines Require SMART FABRICATION
™
Modifications For Dishtable Compatibility.
Updated as of 3/1/2016
Continued From Page 1
2
Continued on Page 3 ☛
Fagor
FI-200W Standard dish tables will NOT work with the dish machine due to depth of machine. Contact Advance Tabco for
pricing.
AD-120W NO MODIFICATION NEEDED.
FI-120W
NO MODIFICATION NEEDED. - MACHINE IS DISCONTINUED.
Hobart
AM-12 Right side sink bowls must be 12” from machine. Add DTA-76 if sink is on right side.
- MACHINE DISCONTINUED.
AM-14 IF sink is on right side of dish machine and is deeper than 10”, sink must be 16” from dish machine. Add
DTA-76 to soil table if required. - MACHINE DISCONTINUED.
AM-15 If dish machine is in corner, left side backsplash return must be notched to 4” tall to clear handle, add DTA-78.
If soil dishtable is on left and dish machine is in corner, prerinse sink must move to 12” dish machine.
C-44/54/64/88, CL44/54/64, CLPS66/76,
CRS-66/76/86/110
Sinks and troughs (and all other obstructions) recommended to be 20” from machine. Add DTA-76 if required.
a special dish machine opening (22”) is required. Add K-508A to each table.
SL-23/30,38DDU A special dish machine opening is required. Add DTA-72 to each dish table.
CCS-66/76/86/110, Soil table opening similar to Hobart SL-23 side loader (add DTA-72), clean table opening 22”. Sinks and troughs
CLCS 66/76/86 (and all other obstructions) recommended to be 20” from machine. Add DTA-76 if required.
AM-15T, AM-15VLT, LT-1 NO MODIFICATION NEEDED.
Insinger
Admiral 44, 66, Speeder 64, 86 Must maintain 24” clear on both sides of machine. Add DTA-76 to soil dishtable.
40-2 Start with BSR series table. Add K-508A to cut hole and install mounting flange. Add sink from page 78 in the
Advance Tabco Product and Price Guide if required. If additional length required use DTA-56.
Commander 18-5, CS NO MODIFICATION NEEDED.
18-6 No obstructions within 6” on right side of machine.
Super 106-2 Must maintain 24” clear on exit (clean) side of machine.
Intedge
DW-50 NO MODIFICATION NEEDED.
Jackson &
Hoshizaki
CREW Series Clean (exit) side no protrusions below surface within 12” of machine, including sink bowls, troughs and
channels. Add DTA-76 to clean table if required.
Tempstar HH Machines built before January 2008, right side sinks bowls must be 12” from dish machine.
Add DTA-76 if sink is right table. (Not required for machines with control box on top of machine).
Tempstar GPX No changes. Verify where 27.5” wide booster heater will fit on floor under table.
100, 150 Sink bowls on left side of machine must be 12” from dish machine. Add DTA-76 to soil table if required. Left side
TS-44, TSC-44, TS-66, TSC-66 Sink bowl or waste trough must be 14” from machine, regardless of direction flow. Add DTA-76 to soil table.
AJ Series, AJX Series No obstructions (including channels) within 12” on either side of machine. Add DTA-76 to soil table if required.
JWE-2400CUA-L25B,
JWE-2400CUA-R25B
Obstructions on clean side (right for an L machine and left for an R machine) must be 16” from machine
Jackson 10 (round) Start with BSR series table. Add 2 K-508A to cut hole and install mounting flange. Add sink from page 78 in
the Advance Tabco Product and Price Guide if required. If additional length required use DTA-56.
Conserver XL/XLH/XL2,
Tempstar, 200, JWE-620UA-6B
NO MODIFICATION NEEDED.
Conserver XL2C Table exiting machine on front (L or R based on machine) must cut down backsplash to 3” tall. Add DTA-78.
WareForce 44 Left side no obstructions within 14” of machine (including support channels). Add DTA-76 to soil table if
required.
Jet Tech
747, F-22 Dish machine newer than 1/2001 no modification required. Older machines add K-508A to each dishtable to
notch front and rear back 1” and lower backsplash to 6” tall. F-22 dish machines made prior to 9/2002 right side
sink bowl must be 14” from dish machine. Add DTA-76 to soil table if required.
F-22T Right side sink bowls must be 14” from dish machine. Add DTA-76 if sink is on right table.
- MACHINE DISCONTINUED.
X35C, X35D NO MODIFICATION NEEDED.
Knight
KLE-235D, KLE-117C, KLE-117I, KLE-
175GT
NO MODIFICATION NEEDED.