User's Manual

28
packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the connect-button in
the Status-page.
8. Maximum Idle Time: The amount of time of inactivity before disconnecting your PPPoE
session. Set it to zero or enable Auto-reconnect to disable this feature.
9. PPPoE Service Name: Optional. Input the service name if your ISP requires it. Otherwise,
leave it blank.
10. Assigned IP Address: It is required by some ISPs. (Optional)
11. Maximum Transmission Unit (MTU):
Most ISP offers MTU value to users. The default
MTU value is 0 (auto).
12. NAT disable: The device would not send private IP to other LAN PC if you select disable.
E. PPTP
1. LAN IP Address: The local IP address of this device. The computer on your network must