User manual

Appendix A. Dial Plan Interface Configuration
61200314L1-1 Dual T1/PRI Module User Manual A-13
S
OURCE
ID
Write security: 3; Read security: 5
Simplifiesthecreationofa D
IAL
P
LAN
inapplicationswherethecriterionfor
switching calls to a certain endpoint is a function of which endpoint origi-
nated the call.
• Default value = 0. The default ID for all endpoints is 0 and all accept
numbers is 0. With default values,all callsareroutedbasedonlyon the
dialed number.
• Multiple endpoints can have the same S
OURCE
ID.
• WhencreatingtheC
ALL
A
CCEPT
list, specifya S
OURCE
ID(s)aswellasa
dialed number or range of dialed numbers to accept.
E
XAMPLE
:
An application requires that all calls that originate from Port 1 of the Dual
T1/PRI Module in Slot 1 be switched to Port 2 of that same module. Assign
auniqueSourceID(e.g.7)toPort1ofthemodule,andthenconfigurePort
2 to only accept calls from that unique Source ID (7).
D
IAL ON
O
FFHOOK
Write security: 3; Read security: 5
Defines a number that is automatically sent to the switchboard when a call
on this endpoint goes offhook.
The Dial on Offhook number must be specific (i.e., no "wild cards").