- Adtran ISDN Router/Bridge User Manual

Chapter 3. Terminal Menu Operation and Structure
61200176L3-1 Express 4110/4120 User Manual 3-39
Authentication/Tx Method
Write security: 2; Read security: 3
This parameter specifies how the Express 4110/4120 is to be authenti-
cated by the PPP peer. There are four possible selections. See “Security/
PPP” on page 3-31 for an explanation of the three PPP standard authenti-
cation types.
Authentication/Tx Username
Write security: 1; Read security: 3
This is the username that is used when being authenticated by the PPP
peer.
Authentication/Tx Password
Write security: 0; Read security: 1
This is the password or secret that is used when being authenticated by
the PPP peer.
Authentication/Rx Username
Write security: 1; Read security: 3
This is the username that is used to match the user to the Connection List
profile. During an incoming call, the Express 4110/4120 will scan all
active connection profiles and match the received PPP peer’s username.
If the name is not found, then the DEFAULT profile is used, if and only if
the DEFAULT profile has nothing in the Rx Username parameter. During
an outgoing call, this username does not have to match the username
reported by the PPP peer.
None
(def) The connection will not allow the PPP peer to
authenticate it.
PAP, CHAP or
EAP
The connection can be authenticated using PAP,
CHAP or EAP.
CHAP or EAP
The connection can be authenticated using CHAP
or EAP only.
EAP
The connection will only allow authentication by the
peer using EAP.