Specifications

61200624L1-1A © 2002 ADTRAN, Inc. 387
Total Access 600 Series System Manual Section 5 DLP-009
8. View C
URRENT TRANSFER STATUS to verify the progress of the current transfer. During a successful
transfer, you will first see D
OWNLOAD: COPYING INTERNAL CONFIG, and then DOWNLOAD IN PROGRESS....
9. When the transfer has successfully completed, I
DLE displays in the CURRENT TRANSFER STATUS field.
Saving Configuration using TFTP Server Accessible Across the WAN
1. Telnet into the unit using FULL or SUPPORT levels (refer to DLP-003, Adding/Removing Telnet Users
and Changing Password Security Levels).
2. Verify the TFTP server is running on the network.
Verify that the unit can ping the TFTP server.
3. Go to the S
YSTEM UTILITY menu and select the CONFIGURATION TRANSFER menu; press <Enter>.
4. Verify the T
RANSFER METHOD is set to TFTP.
5. Set the TFTP S
ERVER IP ADDRESS to the IP address of the machine running the TFTP Server
Program.
6. Change TFTP S
ERVER FILENAME to a unique filename. This will be the name of the configuration file
saved to the remote server. An example filename would be ta_iad.cfg.
Some TFTP servers constrain the format of the filename depending on the operating system of the
server. For example, a TFTP server running on a PC under Windows 3.1 may only permit 8.3 format
filenames (8 characters, period and three extension characters).
7. Select the SAVE CONFIG REMOTELY menu field and press <Enter>.
Enter Y to confirm the request.
8. View CURRENT TRANSFER STATUS to verify the progress of the current transfer. During a successful
transfer, you will first see D
OWNLOAD: COPYING INTERNAL CONFIG, and then DOWNLOAD IN PROGRESS....
9. When the transfer has successfully completed, I
DLE displays in the CURRENT TRANSFER STATUS field.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
TFTP is not secure. No passwords are required for client access. Anyone can access files
through the IP port on the server machine if they know the target file’s name.
If you are using the ADTRAN TFTP server, the IP address displays in the STATUS field.
For other TFTP servers, please refer to the appropriate documentation.
TFTP is not secure. No passwords are required for client access. Anyone can access
files through the IP port on the server machine if they know the target file’s name.