Specifications

Section 4.6 SHDSL ATM UIG Total Access 600 Series System Manual

Managing the Modules – V.35 Setup

Use the V.35 SETUP menu to view and set the parameters shown in Figure 18.

Figure 18. V.35 Setup Menu

CHANNEL RATE and EIA settings are supported via this menu option. For all typical applications, these

settings are left in their default states.

>ATM/FR IWF

This menu contains the setup and status for the ATM/Frame Relay interworking functions.

Mode

The MODE setting configures the V.35 port for FRF5 or FRF8 operation, depending upon the application

being supported.

FRF5

This is also known as Network Interworking. Use this mode for Frame Relay over ATM.

FRF8

This is also known as Service Interworking. In this mode, the Total Access 600 performs a translation

between Frame Relay and ATM protocols.

Configuration

The CONFIGURATION menu is used to support the configuration of Frame-to-ATM interworking, signaling

formats, timeout values, and PVC settings.