Specifications

Section 4.6 SHDSL ATM UIG Total Access 600 Series System Manual
312 © 2002 ADTRAN, Inc. 61200624L1-1A
%Loss
Percentage loss based on ping returned from host (read only).
Configuring WAN Settings
>DSLAM Type
Set this to the type of DSLAM the Total Access 600 will be connecting to.
>Layer One Interface
This is the physical layer protocol used to connect the DSLAM to the Total Access 600.
>Layer Two Protocol
This is the data link layer protocol used to connect the DSLAM to the Total Access 600.
>ATM Config
Use the W
AN menu (Figure 6) to access the ATM CONFIG menu.
Figure 6. WAN Menu