Specifications

Total Access 600 Series System Manual Section 4.6 SHDSL ATM UIG
61200624L1-1A © 2002 ADTRAN, Inc. 311
Current Transfer Status
Indicates the current status of the update.
Previous Transfer Status
Indicates the status of the previous update.
Load and Use Config
Retrieves the configuration file specified in the TFTP SERVER FILENAME field from the server. To start this
command, enter
Y to begin or enter N to cancel.
Save Config Remotely
Saves the configuration file specified in TFTP SERVER FILENAME to the server identified in TFTP
S
ERVER IP ADDRESS. To start this command, enter Y to begin or enter N to cancel.
>Ping
Allows you to send pings (ICMP requests) to hosts. The following items are under this menu:
Start/Stop
Activator to start and cancel a ping test.
Host Address
IP address or domain name (if DNS is configured) of device to receive the ping.
Size (40-1500)
Total size of the ping to send. Range is 40 to 1500 bytes. 64 is default.
# of Packets
Total packets to send every 2 seconds. Setting this to 0 allows the client to ping continuously.
# Transmits
Total packets sent (read only).
# Receives
Total packets received (read only).
If you execute this command, the Total Access 600 retrieves the configuration file, reboots,
then restarts using the new configuration.
Before using this command, you must have identified a valid TFTP server in TFTP SERVER
IP A
DDRESS.
Only one ping session can be active at a time.