Specifications

Total Access 600 Series System Manual Section 4.4 ADSL ATM UIG
61200624L1-1A © 2002 ADTRAN, Inc. 233
LAN-TO-WAN (Out)
The packets which come out toward the WAN from the TA600 can be filtered in three ways:
Out Exceptions
This is a list of up to 32 filter entries. The setup is exactly the same as the FILTERS/IN EXCEPTIONS list.
Configuring the Router – Status
Use the ROUTER/STATUS menu to view and set the parameters shown in Figure 34. The ROUTER/STATUS
screens give the user useful information for debugging the current routes in the Total Access 600.
Figure 34. Router/Status Menu
IPX
from the CONFIGURATION/GLOBAL/SECURITY/FILTER
D
EFINES/IPX FILTER DEFINES list.
FILTER LIST NAME
Selects between filters defined in the list.
NEXT OPER
The next operation to use to combine with the
next filter in the list:
END
the last filter to combination.
AND
logically AND this filter with the next filter in
the list.
OR
logically OR this filter with the next filter in the
list.
DISABLED (def)
Turns off packet input filtering. No outgoing
packets are blocked.
BLOCK ALL
All outgoing packets to the WAN are blocked
except as defined in the
FILTERS/OUT EXCEPTIONS
list.
FORWARD ALL
All outgoing packets to the WAN are not blocked
except as defined in the
FILTERS/OUT EXCEPTIONS
list.